Starting The Engine - Suzuki Address 125 2023 Owner's Manual

STARTING THE ENGINE

STARTING PROCEDURE
Use the following procedure to start the
engine.
1. Check that the engine stop switch is set
to "".
2. Set the ignition switch to ON.
3. Check that the malfunction indicator light
has gone out.
4. Squeeze the front or combined brake
lever.
5. Close the throttle grip completely and
push the electric starter switch "" or
depress the kick starter lever.
 WARNING
Starting the engine improperly can be
hazardous. Starting the engine with the
center stand released can move motor-
cycle forward as soon as engine starts.
Place the motorcycle on the center stand
before starting the engine and do not
release the center stand until engine
revs at idling speed.
NOTE: This motorcycle is equipped with
interlock system for the ignition circuit and
the starter circuit. The engine can only be
started if the side stand is fully up. see
"SIDE STAND / IGNITION INTERLOCK
SYSTEM" on page 2-29.
NOTE: This motorcycle features the Suzuki
Easy Start System, allowing you to start the
engine with a single push of the electric
starter switch. For details, see "SUZUKI
EASY START SYSTEM" on page 2-28.
2-26