Subscribe to Our Youtube Channel
Related Manuals for Symphony SYK-1050
Summary of Contents for Symphony SYK-1050
- Page 1 © 2024 Order #XXXXX SYK-1050 - 10’ x 10’ Portable Backlit Display 10’ 10’ Plan View SETUP INSTRUCTIONS If you would like to tell us about your experience with your setup instructions please email us at info@classicexhibits.com...
- Page 2 © 2024 Order #XXXXX Plan View = 1 sq ft...
- Page 3 © 2024 Order #XXXXX General Information General Setup Instructions WARNING - Read entire setup instruction manual prior to unpacking parts and pieces. - The setup instructions are created specifically for this configuration. - Setup instructions are laid out sequentially in steps, including exploded views with detailed explanation for assembly.
- Page 4 © 2024 Order #XXXXX Tool-less Frame Assembly Slide connector across seam of extrusions. Disassembly Tighten all knobs. Straight Connection 1) Loosen all knobs. When assembling frame, first attach all straight Straight Connector 2) Slide connectors off of one extrusion. connectors, then attach corner connectors.
- Page 5 © 2024 Order #XXXXX SEG Graphic Installation The Perfect Fit SEG Graphic Installation in 3 Steps STEP 1: Attach Corners STEP 2: Attach Middle STEP 3: Attach Sides Always insert graphic into each alternate corner, then into the sides of the frame.
- Page 6 © 2024 Order #XXXXX Case Packing Top View of Each Level 11 12 8,10 Graphic Light Curtain Setup Hardware Level 1 Level 2 Level 3 Level 4 (Bottom level) Case 1 of 1...
- Page 7 © 2024 Order #XXXXX Backwall Frame Assembly Item Qty. Description Steps: 45”h TSP49 Vertical Extrusion Refer to the Tool-less Frame Assembly general information page. 41”h TSP49 Vertical Extrusion 45”h TSP49 Vertical Extrusion 1) Assemble vertical extrusions [1-2], [3-4] & horizontals [5-6-7], [8-9-10] 41”h TSP49 Vertical Extrusion together, using Tool-less Spline Connector...
- Page 8 © 2024 Order #XXXXX Light Curtain Installation Item Qty. Description Light Curtain Attachment 45.209”h Z45 Vertical Extrusion 37.209”h Z45 Vertical Extrusion Approx. 110”w x 5/16” collapsible rod Lift up light curtain. Assemble top & bottom rods. Insert rods through Hook top rod over upper clips, top &...
- Page 9 © 2024 Order #XXXXX Fabric Graphics Application Steps: SEG Graphic Installation 1) Apply SEG Graphic to front of assembled frame. Insert narrow side of STEP 1: Attach Corners silicone welt into the channel at corner 1, with fabric to the outside. Repeat for opposite corner 2, then corner 3, Always insert graphic...
Need help?
Do you have a question about the SYK-1050 and is the answer not in the manual?
Questions and answers