Stratco SS-10475 Assembly Manual

Please carefully read and follow these instructions to assemble your unit. Please carefully read and follow these instructions to assemble your unit.
Please carefully read and follow these instructions to assemble your unit.
ENSURE PROTECTIVE EYEWEAR AND GLOVES ARE WORN WHEN ASSEMBLING THIS UNIT. ENSURE PROTECTIVE EYEWEAR AND GLOVES ARE WORN WHEN ASSEMBLING THIS UNIT.
ENSURE PROTECTIVE EYEWEAR AND GLOVES ARE WORN WHEN ASSEMBLING THIS UNIT.
Please carefully read and follow these instructions to assemble your unit.
WARNING: SERIOUS INJURY CAN BE CAUSED BY TOPPLING FURNITURE. To help prevent tip-over, WARNING: SERIOUS INJURY CAN BE CAUSED BY TOPPLING FURNITURE. To help prevent tip-over,
WARNING: SERIOUS INJURY CAN BE CAUSED BY TOPPLING FURNITURE. To help prevent tip-over,
ENSURE PROTECTIVE EYEWEAR AND GLOVES ARE WORN WHEN ASSEMBLING THIS UNIT.
we recommend you anchor this product to a wall or other suitable surface. Check anchors regularly. we recommend you anchor this product to a wall or other suitable surface. Check anchors regularly.
we recommend you anchor this product to a wall or other suitable surface. Check anchors regularly.
WARNING: SERIOUS INJURY CAN BE CAUSED BY TOPPLING FURNITURE. To help prevent tip-over,
we recommend you anchor this product to a wall or other suitable surface. Check anchors regularly.
C C m m o o e e t t
Components
o o p p n n n s n s
C m o e t
o p n n s
A x 2 A x 2
A x 2
A x 2
END FRAME END FRAME
END FRAME
END FRAME
General Instructions
General Instructions General Instructions
Assembly of this unit is done by fitting the brackets of the Assembly of this unit is done by fitting the brackets of the
Assembly of this unit is done by fitting the brackets of the
beams into the slots of the post frames. beams into the slots of the post frames.
General Instructions beams into the slots of the post frames.
A rubber mallet should be used on the ledge of the beams A rubber mallet should be used on the ledge of the beams
A rubber mallet should be used on the ledge of the beams
Assembly of this unit is done by fitting the brackets of the
to properly seat the beam brackets. If a hammer is used to properly seat the beam brackets. If a hammer is used
to properly seat the beam brackets. If a hammer is used
beams into the slots of the post frames.
care should be taken to protect the beam surface to avoid care should be taken to protect the beam surface to avoid
care should be taken to protect the beam surface to avoid
A rubber mallet should be used on the ledge of the beams
damage by using a protective cloth or block of wood. damage by using a protective cloth or block of wood. damage by using a protective cloth or block of wood.
to properly seat the beam brackets. If a hammer is used
The stepped surface of the beam ledge is the top, and The stepped surface of the beam ledge is the top, and
The stepped surface of the beam ledge is the top, and
care should be taken to protect the beam surface to avoid
should face upwards. This is the surface that the wire should face upwards. This is the surface that the wire
should face upwards. This is the surface that the wire
damage by using a protective cloth or block of wood.
deck will rest on. deck will rest on. deck will rest on.
The stepped surface of the beam ledge is the top, and
A bracket should engage and fit firmly into the tapered slot A bracket should engage and fit firmly into the tapered slot
A bracket should engage and fit firmly into the tapered slot
should face upwards. This is the surface that the wire
of the post frame. This engagement is a tight swaged fit of the post frame. This engagement is a tight swaged fit
of the post frame. This engagement is a tight swaged fit
deck will rest on.
and will apply resistance as it fully engages. A visual and will apply resistance as it fully engages. A visual and will apply resistance as it fully engages. A visual
A bracket should engage and fit firmly into the tapered slot
inspection should be made to show that the bracket is inspection should be made to show that the bracket is
inspection should be made to show that the bracket is
of the post frame. This engagement is a tight swaged fit
properly engaged in the slot. properly engaged in the slot.
properly engaged in the slot.
and will apply resistance as it fully engages. A visual
After assembly re-check each beam for proper engagement. After assembly re-check each beam for proper engagement. After assembly re-check each beam for
inspection should be made to show that the bracket is
proper engagement.
properly engaged in the slot.
After assembly re-check each beam for proper engagement.
JUNE 2024 JUNE 2024
JUNE 2024
JUNE 2024
Heavy Duty Wire Heavy Duty Wire Heavy Duty Wire
4 Shelf Unit 4 Shelf Unit
4 Shelf Unit
Heavy Duty Wire
4 Shelf Unit
TOOLS REQUIRED: Rubber Mallet, Spanner or Adjustable Wrench, Gloves TOOLS REQUIRED: Rubber Mallet, Spanner or Adjustable Wrench, Gloves
TOOLS REQUIRED: Rubber Mallet, Spanner or Adjustable Wrench, Gloves
TOOLS REQUIRED: Rubber Mallet, Spanner or Adjustable Wrench, Gloves
B x 8 B x 8 C x 12 C x 12
B x 8 C x 12
B x 8 C x 12
BEAM BEAM CROSS BAR CROSS BAR
BEAM CROSS BAR
BEAM CROSS BAR
D x 16 D x 16
LOCKING LOCKING
D x 16
SHELF PIN SHELF PIN
LOCKING
LOCKING SHELF PIN
SHELF PIN
E x 4 E x 4
E x 4
WIRE SHELF WIRE SHELF
WIRE SHELF
WIRE SHELF
Safety Instructions
Safety Instructions Safety Instructions
This unit should be placed on a level surface. This unit should be placed on a level surface.
This unit should be placed on a level surface.
Safety Instructions
Failure to do so can result in poor product performance Failure to do so can result in poor product performance
Failure to do so can result in poor product performance
or create a possible safety hazard. or create a possible safety hazard.
or create a possible safety hazard.
This unit should be placed on a level surface.
This unit should be securely anchored to a wall or floor This unit should be securely anchored to a wall or floor
This unit should be securely anchored to a wall or floor
Failure to do so can result in poor product performance
with suitable fasteners, which are not included. with suitable fasteners, which are not included.
with suitable fasteners, which are not included.
or create a possible safety hazard.
Do not use this unit for anything other than the Do not use this unit for anything other than the
Do not use this unit for anything other than the
This unit should be securely anchored to a wall or floor
manufacturer's intended purpose. manufacturer's intended purpose.
manufacturer's intended purpose.
with suitable fasteners, which are not included.
DO NOT STAND ON ANY PART OF DO NOT STAND ON ANY PART OF
Do not use this unit for anything other than the
THE UNIT, OR USE IT AS A LADDER. THE UNIT, OR USE IT AS A LADDER.
DO NOT STAND ON ANY PART OF
manufacturer's intended purpose.
Use care when working Use care when working
THE UNIT, OR USE IT AS A LADDER.
DO NOT STAND ON ANY PART OF
with metal parts. with metal parts.
THE UNIT, OR USE IT AS A LADDER.
Wear gloves for protection. Wear gloves for protection.
Use care when working
Use care when working
Evenly distribute the weight Evenly distribute the weight
with metal parts.
with metal parts.
on each level and always on each level and always
Wear gloves for protection.
Wear gloves for protection.
keep the heavier loads keep the heavier loads
Evenly distribute the weight
Evenly distribute the weight
on the bottom. on the bottom.
on each level and always
on each level and always
keep the heavier loads
keep the heavier loads
on the bottom.
on the bottom.
1 1
1
1
SS-10475 SS-10475
SS-10475
SS-10475
F x 24 F x 24
F x 24
BOLT, NUT & BOLT, NUT &
BOLT, NUT &
WASHER WASHER
WASHER
BOLT, NUT &
WASHER
x 4 x 4
x 4
x 4 x 4
x 4
x 4 x 4
x 4