Advertisement
Quick Links
THANK YOU FOR PURCHASING YOUR 2 DOOR METAL UTILITY CABINET.
Each shelf can hold a maximum load of 45kg.
Please carefully read and follow these instructions to assemble your cabinet.
ENSURE PROTECTIVE EYEWEAR AND GLOVES ARE WORN WHEN ASSEMBLING THIS UNIT.
Step 1
FITTING SIDE
PANELS TO
BACK PANEL
Step 2
FITTING FRONT
DOOR PANELS
TO SIDE PANEL
Slot front door panel into
one side then into the other.
Note: Ensure the front door
panel is flush with the side
panels. This is easier to do
with the doors open.
Step 3
FITTING THE
TOP PANEL
1
JUN 2022
2 DOOR METAL
UTILITY CABINET
C
Slide the top panel inside
D
the cabinet until flush
with the top of panels.
A
Screw together
back panel
and left hand
side panel
at locations
indicated by
the arrows.
HT-6401
Screw together
back panel
and right hand
side panel
at locations
indicated by
the arrows.
Screw the top panel to
E
the inside of the cabinet
as indicated by the arrows.
B
Advertisement
Related Manuals for Stratco HT-6401
Summary of Contents for Stratco HT-6401
- Page 1 2 DOOR METAL UTILITY CABINET HT-6401 THANK YOU FOR PURCHASING YOUR 2 DOOR METAL UTILITY CABINET. Each shelf can hold a maximum load of 45kg. Please carefully read and follow these instructions to assemble your cabinet. ENSURE PROTECTIVE EYEWEAR AND GLOVES ARE WORN WHEN ASSEMBLING THIS UNIT.
- Page 2 2 DOOR METAL UTILITY CABINET HT-6401 Step 4 Step 5 FITTING THE FITTING THE MIDDLE BOTTOM PANEL DIVIDER PANEL TO THE CABINET Insert the middle Push the floor panel down divider inside the cabinet ensuring panel and the sides of the floor slide...
Need help?
Do you have a question about the HT-6401 and is the answer not in the manual?
Questions and answers