Advertisement
6.
Plug the power cables of your computer and your monitor into a nearby electrical outlet.
7.
Turn on your computer and monitor. If the monitor does not display an image, refer to the
troubleshooting section of this guide.
1.
Earphone jack
2.
Volume control
3.
Power button
4.
Power indicator
5.
ADJUST -/+
6.
SELECT -/+
7.
Function indicators
The description of function indicators is as below:
Brightness: adjusts the background brightness of the screen image.
Contrast: adjusts the contrast between the foreground and background of the screen image.
Horizontal size: adjusts screen width.
Horizontal position: moves screen image to the left or right.
Vertical size: adjusts screen height.
Vertical position: moves screen image up or down.
Pincushion: straightens the left and right vertical edges of the display.
Trapezoid: adjusts the width of the top and bottom of the screen.
Rotation: adjusts the viewing area when it is tilted left or right.
Use the monitor CD to install the appropriate monitor driver for your operating system.
Windows 98 automatically detects the new monitor and displays the Add New Hardware Wizard
dialog box if the monitor driver is not already installed.
1.
Insert the monitor CD into the CD-ROM drive, and click Next> twice when the Add New Hardware
Wizard dialog box appears.
Click the CD-ROM drive box to install the drivers from the CD and then click Next>.
Confirm that the driver was found on the CD, and click Next> twice to install the driver.
Click Finish to exit the Add New Hardware Wizard dialog box.
To manually install or update the driver, perform the following steps:
1.
Click Start > Settings > Control Panel and then double-click Display.
In the Display Properties window, click the Settings tab, and then click Advanced.
Click the Monitor tab, and then click Change.
2
Dell E550mm Color Monitor Quick Setup Guide
This jack is for an optional earphone
Use this wheel to adjust audio volume.
Use this button to turn the monitor on and off.
This light glows green during normal operation.
These buttons allow you to adjust the settings to lower or higher value of the
selected function.
These buttons allow you to select from the various functions.
The indicator will turn green when you select the respective function.
Advertisement
