System Information; Muting Headset During A Call; Usb Adapter Indicator Light; Headset Controls And Indicators - Plantronics VOYAGER PRO UC 200B User Manual

4 System Information

muting Headset During a Call

To mute a call, press and hold the volume + and - buttons
simultaneously until you hear a status prompt. The sequence
will start with low-high tones plus a voice prompt "Mute On" (in
English). The low-high tones repeat after 15 minutes to advise
mute is activated. The full sequence repeats every 30 minutes
until mute is de-activated.
To unmute a call, press and hold the volume + and - buttons
simultaneously until you hear high-low tones followed by a voice
prompt "Mute Off" (in English).

USB Adapter Indicator Light

USB Adapter Status
Headset in talk mode
Adapter and headset pairing
Connected, no activity
Powered on - headset not paired

Headset Controls and Indicators

Power on/off
Check if headset is powered on
Incoming call
Call answer/end
Adjust the volume (during a call)
Call indicator light
(enable/disable)
Reconnect after leaving range
for more than 30 seconds
Plantronics Voyager PRO UC User Guide
Action
Press power/off button 2
seconds
Short press call control button
or volume + or - button
None
Short press call control button
Short press volume + or -
button
With headset powered on, press
power, volume + and - buttons
simultaneously for 1 second
Short press call control button
Indicator Light
Flashes blue
Flashes red and blue
Solid blue
Solid red
Indicator Light
On: solid blue for 2 seconds
Off: solid red for 2 seconds
Short blue flash
Flashes blue
Short blue flash
Single blue flash
Turn indicator on: blue glow
increases for 2 seconds
Turn indicator off: blue glow
fades for 2 seconds
Single blue flash
Volume Up (+) and Down (-) Buttons
tone
On: ascending tone
Off: descending tone
None
Three single low tones
Single low tone followed by low-
low-high tones
Tone at each change in volume.
Double tone when min/max
volume level reached
Single low tone
Single low tone
9