Set Up; Connecting Usb Adapter To Pc; Charging Headset; Fitting Headset - Plantronics VOYAGER PRO UC 200B User Manual

2 Set Up

2.1 Connecting USB Adapter to PC

1
Insert the USB adapter into USB Port on PC. The indicator
light on the USB adapter will be solid red to indicate the USB
adapter is powered on.
ImPoRtAnt notE For best performance it is recommended
that Windows is updated with Service Pack levels listed below:
Microsoft Windows XP-Service Pack 3 (SP3) or later
®
Microsoft Windows Vista -Service Pack 1 (SP1) or later
®

2.2 Charging Headset

1
Connect the AC charger to outlet and headset.
The indicator light on the headset will be solid red to indicate
that the headset battery is charging.
2 Charge for at least 30 minutes prior to the first use.
A full charge takes 1.5 hours.
Indicator
Light
notE Always charge at near room temperatures; never charge
battery at temperatures below 0
Plantronics Voyager PRO UC User Guide
CHARgIng TIME
30 min .....................
Minimum charge
before first use
1.5 hours ................
Full charge
C (32 F) or above 40 C (104
º º º º
notE The USB charging cable can also be used to charge the
headset. To successfully charge your headset with the USB cable
the PC must be on and in active state (not standby). The charging
time will vary according to the number of other devices drawing
power from the PC's USB port(s).

2.3 Fitting Headset

The headset comes configured for the right ear. Ensure a proper
fit for optimal sound clarity and comfort.
1 Guide the earloop behind your ear and place the
headset so that the speaker and eartip rest comfortably
in your ear.
1
2
For optimal voice clarity, pivot the boom up or down to
point the microphones toward the corner of your mouth.
The headset can be worn on either ear by adjusting the
microphone boom. To convert for wearing on the left ear:
3 Pivot the boom into an upright position.
4 Rotate the boom and speaker to the other side of the
headset.
F).
2
3
4
6