Prunus J-125 User Manual

PRUNUS J-125 FM/AM Radio User Manual
Thank you for purchasing the PRUNUS J-125 radio. In order to get the best performance from the radio, please
read this manual carefully before using it and take special caution in the section below.
Precautions
◆Please remove the batteries if you are not intended to use this radio for a long period of time.
◆Please do not use this product near or into any kind of liquid.
◆Please do not use this radio at a temperature over 40 degrees Celsius.
Functional Components
①ON/OFF: Power Switch
②EAR JACK: Earphone Jack
③DC 3V: Power-in Jack
④VOL + : Volume +
⑤VOL - : Volume -
⑥AM/FM (Mode will loop in between
AM/FM or Clock/Alarm clock)
⑦Preset/Scan and memory radio
channels/Time set/Alarm clock set
⑧M-: Memo -
⑨M+: Memo+ ⑬ ⑭
⑩TUN+: Frequency Tuning+
① ② ③
⑪TUN- : Frequency Tuning-
⑫Stereo/Lock button
⑬Lanyard/Aerial
STEREO
⑭Lanyard hole
Power Supply
1.Battery Power ：The J-125 radio requires 2 AAA batteries which can be replaced.
2.Plug-in：Another way is that you can listen to the radio by plugging in. But please use the standard DC
3V/500-1000mAh power adaptor and plug it into <③DC 3V> .
◆The power adaptor must meet voltage with DC 3V, or it may damage the radio.
◆The DC 3V power adaptor is not included in package. If you need an adaptor, you could buy it yourself on
Amazon.
Radio Reception
1. Press <①ON/OFF> to turn the radio on.
2. Press <⑥AM/FM> to switch between "FM" and "AM" mode.
3. How to search and store channels?
1) Auto Search and store channels
Press and hold <⑦PRESET> for 3 seconds to automatically search, store and numbered the channels in your
areas; The channels will save in an order as "P00""P01"..."P19" and store up to 20 channels.
2) Previous/Next Search
Long press <⑩TUN+> or <⑪TUN-> to search for the previous or next available channel near you, when a channel
is detected, it will stop searching and play the current channel automatically.
3) Manually Preset
Press <⑦PRESET>to store the channel while it is playing; When the screen appears "PRESET", press either <⑧
M-> to reduce or <⑨M+> to add number the channel (any number from"P00" to "P19"), press <⑦PRESET> again
or wait for 5 seconds to store the channel, as soon as the blinking "PRESET" disappeared which means the
channel has been stored and numbered.
4. Press <⑧M->or <⑨M+> to select the channels you have stored.
5. Press and hold <④VOL +>or <⑤VOL -> to adjust the volume.
6. Press <①ON/OFF> to turn off the radio. (Attention: When the radio is OFF, it will turn into clock mode).
Note:
◆Adjust the position and rotate the radio to get the best reception.
◆In order to get a better indoor reception, place near to the window and keep it away from any electronic
devices (such as computers, TVs, refrigerators, mobile phones, etc).
⑩
⑪
⑧
STEREO
⑥
⑨
⑦
DC 3V
EN
◆If you have taken out the batteries, you will need to reset the stored channels when you reinsert back the
batteries again.
Time Function
1. How to set time?
1) Press <①ON/OFF> to turn into clock mode.
2) Press <⑦PRESET> to set the clock time.
3) Press <⑩TUN+> or <⑪TUN-> to select for 12 or 24 hours mode, the screen numbers will flash for 5 seconds,
you need to select during this period.
4) Then press<⑦PRESET>within 5 seconds, the hour digits start blinking, press <⑩TUN+>or <⑪TUN-> to adjust
the hour, you need to set the hour time within 5 seconds.
5) Repeat the same procedure in 4) to set the minutes.
6) Press<⑦PRESET> again or wait 5 seconds, the minutes numbers will stop blinking, then the screen numbers
show the time you set.
④
Note:
⑤
◆When playing in radio mode, time will display after 10 seconds.
2. How to set alarm clock?
⑫
1) Press <⑥AM/FM> to switch to alarm clock mode, then the alarm clock icon
2) Press <⑦PRESET> to set the alarm clock,
adjust the hour in 5 seconds.
3) Follow the same procedures to set the alarm clock minutes.
4) When finish the setting, the numbers will flash for 5 seconds and return to the time. Don't worry, the alarm
clock has been set.
3. How to stop the alarm clock?
1) Press <①ON/OFF> to stop the alarm clock. It will repeat the same time the next day.
2) If you want to completely cancel the alarm clock you have previously set, please press <⑥AM/FM>, then
disappear and the alarm clock has been canceled (press this button again will turn back on the alarm clock you
have canceled).
Note:
If you have removed the batteries or the batteries are flat, you will need to reset the time and the alarm when you
reinsert back the batteries again.
Headphones
In order not to disturb others around you, you can use headphones to listen to the radio.
1. Plug the headphone into the <②EAR JACK> and the radio will automatically switch to headphone listening
mode and the built-in speaker will be muted.
2. If you want stereo sound, please press <⑫STEREO/LOCK BUTTON> to turn on headset into stereo mode.
3. When you pull out the headphones, the radio will switch back to the speaker mode. Please adjust the volume
from time to time, to suit for optimal volume.
Lock Key
1. Long press <⑫STEREO/LOCK BUTTON> until the Key icon
buttons are locked.
2. If you want the other buttons to work again please long press the Lock button until
the other buttons has been unlocked.
After Sale Service
◆If the radio fails, please scan this
QR code, Then click "Ask a
question"and log into Amazon to
contact us, we will provide you the
best service:
◆You can also send your messages
to our customer service e-mail:
prunus-technik@hotmail.com
appears.
and the hour digits start blinking; Press <⑩TUN+>or <⑪TUN-> to
appears and starts flicking, it means the other
US US UK
EN
will
disappears, it means
UK CA CA