Advertisement

PRUNUS J-05 Radio User Manual
Thank you for purchasing the PRUNUS J-05 radio. In order to get the best from the
radio please read this manual carefully before using it and take special notice of the
section on precautions.

Precautions

◆If you will not use the radio for a long time, please take out the batteries.
◆Please do not use this product near water or put it into liquid.
◆Please do not use this product near the environment over 40 degrees Celsius.
◆Each index of the radio is adjusted well, so please do not adjust the components in the
radio.

Functional components

①Volume/Power knob
②Tuning knob
③Band switch
④Frequency display
⑤Telescopic aerial

Power Supply

1.AC power supply:
1)Take the included AC power cord out from the packing box.
2)Plug the end with two holes into <⑨AC in Jack> and plug the other end into the socket
(Voltage: 110V/50Hz).
2. Type D(Um-1)Battery*3:
The J-05 radio requires 3 D batteries (not included) which can be replaced.
Battery installation:
1) Open the Battery Compartment Cover.
2) Follow the electrode marks inside battery compartment to install 3 Type D batteries.
3) Replace the battery compartment cover.
Note:
◆Don't use a new battery and old batteries together.
◆Don't use batteries of different type or brand together.
◆Don't use batteries with different power (mAh).
⑥Handle
⑦Speaker
⑧Earphone jack
⑨AC in jack
⑩Battery door
EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the J-05 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Prunus J-05

  • Page 1 PRUNUS J-05 Radio User Manual Thank you for purchasing the PRUNUS J-05 radio. In order to get the best from the radio please read this manual carefully before using it and take special notice of the section on precautions. Precautions ◆If you will not use the radio for a long time, please take out the batteries.
  • Page 2 Radio Reception 1. Push <③Band switch> to the “FM”, “AM” or “WB” position. 2. Turn the <①Volume/Power knob> to turn on the radio. 3. Rotate the <②Tuning knob> to select the station you want to listen to. 4. Turn the <①Volume/Power knob> again to adjust the volume. 5.

Table of Contents