Subscribe to Our Youtube Channel
Related Manuals for ThermoFlow Ot5
Summary of Contents for ThermoFlow Ot5
- Page 1 Storage Water Heater 5L Ot5 Combi Ut5 Combi Non-Pressure 0 MPa (0 bar) manual storage 5L UK v.1 2212.indd 1 manual storage 5L UK v.1 2212.indd 1 2022/12/30 上午10:48 2022/12/30 上午10:48...
- Page 2 OT5 OBERTISCH/ OVERSINK 2. Ot5 Set QMIX10 UT5 UNTERTISCH/ UNDERSINK 2. Ut5 Set QMIX12 manual storage 5L UK v.1 2212.indd 2 manual storage 5L UK v.1 2212.indd 2 2022/12/30 上午10:48 2022/12/30 上午10:48...
- Page 3 3. Ut5 Set Ovalis 4. Ut5 Set Angular 5. Ut5 Set Tantum 6. Ut5 Set Ovalis Pro manual storage 5L UK v.1 2212.indd 3 manual storage 5L UK v.1 2212.indd 3 2022/12/30 上午10:48 2022/12/30 上午10:48...
- Page 4 Use of the manual Thank you for selecting our non-pressure 5-litre Thermoflow device. These instructions contain important information about commissioning, operating the device and maintenance. To ensure your safety and that of others we suggest that you read these installation and operating instructions before using the device for the first time.
- Page 5 It is adamant you use a low pressure valve! Statement of conformity Thermoflow duly declares that the Thermoflow boiler complies with the following direc- tives: • 2014/35/EC Low Voltage Directive • 2014/30/EU Electromagnetic Compatibility Directive (EMC) •...
- Page 6 Installation The device should be installed in accordance with the drawing on the first page of the user manual. Any other installation position may result in serious damage to the de- vice. Installation should take place as close as possible to a cold water connection. The product should be protected from the effects of frost (for example in caravans, summer houses, etc.).
- Page 7 (a time switch for example) or connected to a circuit, which is regularly switched on and off by the power supply company. Technical specifications Description Ut5 / Ut5 Combi Ot5 / Ot5 Combi Wall mounting Vertical Nominal volume Liter...
- Page 8 Device size (Ut5 / Ut5 Combi) G3/8 G3/8 Device size (Ot5 / Ot5 Combi) G1/2 G1/2 User instructions The device must be filled with water before connection to the electrical supply! When powering up for the first time, you must verify that the temperature indicator (light) extinguishes when the required temperature is reached (the device has reached the set temperature).
- Page 9 When filling for the first time, the hot water valve in the low-pressure tap fitting must be open so that water can flow into the device. If the device is not filled with water be- fore-hand during installation, the automatic safety device will activate and switch off the appliance.
- Page 10 Maintenance Maintenance This device does not require any maintenance by the user. Professional maintenance should always be carried out by an expert. If faulty, never try to repair the device yourself. Please contact the nearest service specialist or the party that supplied the device originally. De-scaling A service inspection should be performed by authorized and qualified technical staff every year.
- Page 11 Trouble shooting Fault Explanation Solution No voltage Check fuse and socket The indicator lamp does not Device has reached the set light up No need to do anything temperature Water temperature not as Change the setting of the ther- Thermostat set incorrectly required mostat Check whether other cold water...
- Page 12 NEG-Novex Großhandelsgesellschaft für Elektro- und Haustechnik GmbH Chenover Str. 5 D-67117 Limburgerhof www.thermoflow.de 5L UK v.1 2212 manual storage 5L UK v.1 2212.indd 12 manual storage 5L UK v.1 2212.indd 12 2022/12/30 上午10:48...
Need help?
Do you have a question about the Ot5 and is the answer not in the manual?
Questions and answers