Ending Calls; Switching Calls Between The Handset, Headset And Speakerphone; Adjusting The Volume - Plantronics CALISTO PRO Getting Started

Ending Calls

To end a Do the following:
call using:
Handset Press the End
Headset Press the Headset button inward for under 1 second
or until you hear a single beep.
To place calls on the headset:
• to make a call: Dial the number on the handset, then
press the headset button under 1 second.
• to receive or end a call: Press the headset button under
1 second.
Also, see the QuickTips card under the charging base.
6
key on the handset.
Switching Calls Between the Handset,
Headset and Speakerphone
To transfer from: Do the following:
Handset Headset Press the Headset button on the headset for under
1 second. The Handset key is no longer illuminated,
and is now displayed on the screen. The
headset light will flash blue every 4 seconds when
used during a call.
Headset Handset Press the Handset
The key will light up when active.
Handset or Headset Press the Speakerphone
Speakerphone light up when active.
For basic handset and headset calling functions including redial and mute,
please refer to the QuickTips card beneath your Calisto charging base.

Adjusting the Volume

For the handset, headset, or speakerphone, use the Volume Up / Down button
on the side of handset during a call.
Alternatively, for the headset, you can move the Headset button in an up or
down position (as opposed to inward) to adjust the headset volume.
Please refer to the safety instructions for information on
headsets and hearing.
key on the handset.
key. The key will
7