Using The Headset With Your Mobile Phone; Pairing The Headset With Your Mobile Phone; Placing, Receiving And Ending Mobile Calls Using The Headset - Plantronics CALISTO PRO Getting Started

Using the Headset With Your Mobile Phone

The Calisto headset functions like a traditional Bluetooth
used with your mobile phone. It has the ability to operate completely
separate from the Calisto handset/phone and has many of the same
features as most popular Bluetooth headsets on the market, including
voice dialing (mobile phone must support this feature) and redial.

Pairing the Headset with Your Mobile Phone

To use the Calisto headset with your Bluetooth compatible mobile phone, the
headset first needs to be paired with that device. You will need to refer to
the user's manual for your mobile phone for specifics on how to pair Bluetooth
devices. You can also refer to the Plantronics Web site to see if there are
instructions specific to your mobile phone
Once the headset and mobile phone are paired, you can use the headset
with both the Calisto and your mobile phone. You only need to pair the headset
with your mobile phone once.
1. Before you begin, make sure your mobile phone is Bluetooth compatible.
You may need to refer to the user's guide for your mobile phone to find out
this information.
2. While wearing the headset, turn it off by holding down the Headset button
for 4 seconds, until you hear 4 descending beeps. Once powered off,
remove headset.
3. Refer to your mobile phone's user's manual for specific instructions about
activating Bluetooth pairing.
4. While your mobile phone is searching for Bluetooth devices, hold down
the Headset button on the headset for 4 to 6 seconds until the light on the
headset flashes red and blue.
5. When the mobile phone detects the headset, select Calisto PLT from list of
found devices.
6. When mobile phone prompts you for a passcode, enter "0000" on the mobile
keypad as shown.
Your headset is now paired
with your mobile phone
and works within 33 feet
of your mobile phone.
8
® headset when
www.plantronics.com/easytopair
Placing, Receiving and Ending Mobile Calls
Using the Headset
Placing Calls
Once your headset is on and connected to your mobile phone, dial the
number and press the Talk / Send key on the mobile phone. The call
automatically connects to your headset.
With some mobile phones, you may need to press the Headset button
for under 1 second, or until you hear a single high beep, to transfer the call
to the headset.
Receiving Calls
When your mobile phone rings, press the Headset button on the headset
for under 1 second or until you hear a single high beep to answer the call.
Note that your headset must be within 33 feet of your mobile phone.
Some mobile phones require you to accept the headset connection
each time you receive a call on the headset.
Ending Calls
Press headset button to end the call, or end the call using your mobile phone.
If you are using the headset,
press the Headset button inward
for under 1 second to end call.
tIP When using the headset with your mobile phone for the first time, it is recommended
that you do it out of range from the Calisto handset and base. Once you have success-
fully received and answered calls with your mobile phone, bring the headset back within
range to answer both landline and mobile calls.
9