Bose CineMate II Series Service Manual

Digital home theater speaker system

Hide thumbs Also See for CineMate II Series:

User manual

Owner's manual (122 pages)

Guía de usuario (32 pages)

page of 21

/ 21
Bookmarks

Quick Links

Download this manual

CineMate

Series II

CineMate

GS Series II

Digital Home Theater Speaker System

Service Manual

Reference Number 318842-SM Rev. 11

Electronic Copy Only

Need help?

Do you have a question about the CineMate II Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Bose CineMate II Series

Page 1 ® CineMate Series II ® CineMate GS Series II Digital Home Theater Speaker System ©2009 Bose Corporation Service Manual Reference Number 318842-SM Rev. 11 Electronic Copy Only...
Page 2 CONTENTS Safety Information ..........................3 Specifications ............................ 4 Electrostatic Discharge Sensitive (ESDS) Device Handling ............5 Warranty ............................. 5 Part List Notes ..........................5 ® Packaging Part List, CineMate Series II (see Figure 1) .............. 6 Figure 1. System Packaging View ..................... 6 Accessory Kit Packing List, CineMate Series II (see Figure 2) ..........
Page 3 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF BOSE CORPORATION WHICH IS BEING FURNISHED ONLY FOR THE PURPOSE OF SERVICING THE IDENTIFIED BOSE PRODUCT BY AN AUTHORIZED BOSE SERVICE CENTER OR OWNER OF THE BOSE PRODUCT, AND SHALL NOT BE REPRODUCED OR USED FOR ANY OTHER PURPOSE.
Page 4 SPECIFICATIONS System Specifications: Power Rating: US/Canada: 100 - 240VAC, 50/60 Hz, 300W Europe/UK/Aus: 100 - 240VAC, 50/60 Hz, 300W Japan: 100 - 240VAC, 50/60 Hz, 300W Dual Voltage: 100 - 240VAC, 50/60 Hz, 300W Maximum Ambient Temperature: 45 degrees C Low Frequency Cut-off (typical): Basic System: Arrays:...
Page 5 PRODUCT DESCRIPTION CineMate ® Series II is a refresh of CineMate that includes two array speakers, Acoustimass ® module, interface module with digital and analog audio input and a remote control. The system offers digital audio for an impactful, spacious audio experience and a simple remote control that avoids the need for programming.
Page 6 MAIN PART LIST Item Description Part Number Qty. Note Number ® QUICK START GUIDE, CINEMATE SERIES II GS 323022-0010 LITERATURE KIT, 120V, INCLUDES BATTERY, AA, BAGGED & LABELED 194392 BUMPER, RECESSED, FOOT, .88" 142839 CARD, REGISTRATION AND WARRANTY 262933 GUIDE, OWNER, CINEMATE SERIES II, US/AIM 323023-0010 GUIDE, OWNER, CINEMATE SERIES II, APAC 323025-0010...
Page 7 ACCESSORY KIT PACKING LIST Item Description Part Number Qty. Note Number LINE CORD, 120V, POL, DET, BLK, 96" 260082-001 LINE CORD, 120V, POL, DET, BLK, 60" 262814-0310 LINE CORD, 230V, UKS, DET, BLK, 96" 280138-001 LINE CORD, 230V, UKS, DET, BLK, 60" 280138-0310 LINE CORD, EURO, DETACHABLE, 96"...
Page 8 PACKAGING PART LIST Item Description Part Number Note Item Description Part Number Note Number Number SCREW, TT, 8-32X0.5,PAN, XREC/SQ 289393-008 SCREW, TAPP, 8-11x.437, PAN, 289388-007 XRC/S ENCLOSURE, REAR, PAINTED, BLK 318960-403 SHIM, DSP PCB, SNAP HEATSINK 319839-0010 SCREW, TAPP, 6-32, PAN, TORX 279948-08 CINEMATE II, DSP, SERVICE BOM 318878-011S...
Page 9 SPEAKER ARRAY ASSEMBLY PART LIST Item Description Part Number Qty. Note Number GRILLE, ASSEMBLY 323211-0010 NAMEPLATE, BOSE LOGO 319457-0010 Note: Only the parts listed above are replaceable. Figure 4. Basic Speaker Array Assembly Item Description Part Number Qty. Note Number...
Page 10 ELECTRICAL PART LIST Bass Module DSP PCB Assembly Resistors Resistors Reference Description Part Number Note Reference Description Part Number Note Designator Designator 60.4K, 0603, .1W, 1% 191465-6042 R7107 2K, 0603, .1W, 5% 199403-202 26.7K, 0603, .1W, 1% 191465-2672 R7108 75 OHM, 0603, .1W, 5% 199403-750 68.1K, 0603, .1W, 1% 191465-6812...
Page 11 ELECTRICAL PART LIST Bass Module DSP PCB Assembly Capacitors Continued Capacitors Continued Reference Description Part Number Note Reference Description Part Number Note Designator Designator C255 .01uF, 0603, X7R, 50V, 10% 191470-103 C7301 .047uF, 0603, X7R, 50V, 10% 191470-473 C256 1uP, EL, 85C, 50V, 20% 177902-010H C7302 .047uF, 0603, X7R, 50V, 10%...
Page 12 ELECTRICAL PART LIST Bass Module DSP PCB Assembly Integrated Circuits Reference Description Part Number Note Designator IC, PWM, V, CNTRLLR, TPS40200 303218-001 IC, VOLT REG, ADJ, 500MA, DPAK 258496-001 U150 IC, PWR AMP, PSO-20, TDA8566TH 257975 U250 IC, PWR AMP, PSO-20, TDA8566TH 257975 U350 IC, PWR AMP, PSO-20, TDA8566TH...
Page 13 ELECTRICAL PART LIST Bass Module Power Supply PCB Assembly Capacitors Continued Resistors Reference Description Part Number Note Reference Description Part Number Note Designator Designator R701 20K, 0603, .1W, 1% 191465-2002 C729 470pF, CER, Y1, 250VAC, 10MM, 20% 310461-471KB R703 47K, 0603, .1W, 1% 191465-4702 C730 3300pF, 0603, X7R, 50V...
Page 14 ELECTRICAL PART LIST Bass Module I/O PCB Assembly Resistors Reference Description Part Number Note Designator R600 POTENTIOMETER, 10K, 20% 273741-001 R601 470K, 0805, 1/10W, 5% 133626-4745 R602 470K, 0805, 1/10W, 5% 133626-4745 R603 470K, 0805, 1/10W, 5% 133626-4745 VR701 VARISTOR, bMET OX, 14mm DISC, 361431-0020 300V, 125J Capacitors...
Page 15 DISASSEMBLY PROCEDURES Bass Module Procedures 1. Rear Enclosure Removal 1.1 Place the bass module on its side. Using a phillips-head screwdriver, remove the four screws that secure the rear enclosure to the bass module cabinet. 1.2 Lift the rear enclosure partially off of the bass module.
Page 16 DISASSEMBLY PROCEDURES Power Supply PCB Removal Continued 3.2 Remove the two cables connected to the power supply board. 4. DSP PCB Removal 4.1 Release the bracket holding the DSP board by placing a flat blade screw driver into the gap shown in the picture to the right. 4.2 Once the bracket is released, the DSP can be pulled away from the heatsink.
Page 17 Repeat this at the other end of the grille. Re-Assembly Note: Align the grille so that ® the Bose logo is facing the same direction as the arrows on the front of the array enclo- sure. Press the grille in place. It should latch to the enclosure at each end.
Page 18 Functional Test Setup 2.2 Point the CineMate remote control at Equipment required: the interface module and press power. The ® CineMate Series II Interface Module cable green LED should turn on. CineMate Series II IR Remote control CineMate Speaker Array Cable CineMate Speaker Array, Qty.
Page 19 TEST PROCEDURES Satellite Array Procedures 3.2 Listen for air leaks around all enclosure seams, joints and the input connector. Air Notes: leaks will be heard as a hissing or sputtering The satellite arrays are non-repairable. noise. Repair any air leaks. All repairs must be hidden.
Page 20 Power Supply part number changed New number includes the MOV Bass Module part number changed Includes new Power supply board 12/13/2013 Bose Logo part number change from 269981-001 to 319457-0010. 11/14/2014 Added thermoform part number for GS Part of cost reduction cubes.
Page 21 SPECIFICATIONS AND FEATURES SUBJECT TO CHANGE WITHOUT NOTICE Bose Corporation The Mountain Framingham Massachusetts USA 01701 318842-SM Rev. 11 P/N: 8/2009 (H) http://serviceops.bose.com...

This manual is also suitable for:

Cinemate gs ii series