Download Print this page

Nemalux LS Series Installation Manual

Temporary stringer light

Advertisement

Quick Links

LS Series Installation Manual
TEMPORARY STRINGER LIGHT
APPLICATION
The LS is rated for indoor and outdoor use, addressing temporary lighting needs in industrial, marine,
and hazardous locations. With an IP66/67 protection level, the versatile LS o ers a lightweight solution
during construction, operation, and maintenance.
Conforms to:
Hazardous Location
Certi cation:
Housing:
Rated Voltage:
Rated Power:
Connections:
Temperature Range:
Ingress Protection:
MADE IN CANADA
Installation
UL 844, UL 1088, CAN/ULC-S1088, UL 1598, UL 1598A:
CSA 22.2 No.137
Class I, Division 2, Groups ABCD, T5;
Class II, Division 1, Groups EFG, T5;
Class III;
Class I, Zone 2, Groups IIC;
Class I, Zone 20, Groups IIIC
Copper-free high pressure die-cast aluminum body & borosilicate glass lens.
120 VAC , 50/60 Hz
19.5W per module
Standard: Black: Line | White: Neutral | Green: Ground
-50° C to +70° C
IP66/67 | Suitable for wet locations. Marine outside type (salt water).
www.nemalux.com | sales@nemalux.com | Tel 403•242•7475 | Fax 403•243•6190
Spec Sheet
Webpage
LS
rev. C-01
1-6

Advertisement

loading
Need help?

Need help?

Do you have a question about the LS Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Nemalux LS Series

  • Page 1 Standard: Black: Line | White: Neutral | Green: Ground Temperature Range: -50° C to +70° C Ingress Protection: IP66/67 | Suitable for wet locations. Marine outside type (salt water). www.nemalux.com | sales@nemalux.com | Tel 403•242•7475 | Fax 403•243•6190 MADE IN CANADA...
  • Page 2 Class and Division/Zone where the connection is made. If the temporary lighting string is installed in a wet location, the junction box or connector must be listed and recognized for use in wet locations. www.nemalux.com | sales@nemalux.com | Tel 403•242•7475 | Fax 403•243•6190 MADE IN CANADA...
  • Page 3 To replace a damaged cord, refer to the instructions on pages 3-4 for assembling the LS-KIT into an approved temporary string light. STEP 5. Plug-in or energize circuit. www.nemalux.com | sales@nemalux.com | Tel 403•242•7475 | Fax 403•243•6190 MADE IN CANADA...
  • Page 4 120VAC/8A. If the temporary lighting string is connected inside a classi ed (hazardous) zone, the connector must be rated for the hazardous Class and Division/Zone where the connection is made. www.nemalux.com | sales@nemalux.com | Tel 403•242•7475 | Fax 403•243•6190 MADE IN CANADA...
  • Page 5 Attach end cap assembly to the core with the supplied M4 socket head cap screws (3) with M4 hex driver torque to 2.3 N-m (20 in-lbs). STEP 5. Repeat steps 2-4 for the other side of the module. www.nemalux.com | sales@nemalux.com | Tel 403•242•7475 | Fax 403•243•6190 MADE IN CANADA...
  • Page 6 (handrail, exposed beams, pipe rack, etc.) in the desired location with adjustable strapping, hook, or surface-mount bracket accessories. Cam buckle straps, stainless steel mounting clamps, hooks and surface mounts are available separately. www.nemalux.com | sales@nemalux.com | Tel 403•242•7475 | Fax 403•243•6190 MADE IN CANADA...