Floor stand with weels and electric adjustment for 55"-100" 120 kg screens, vesa: 200x200, 300x200, 300x300, 350x350, 400x200, 400x300, 400x400, 600x200, 600x400, 800x400, 800x600
Floor stand with wheels and electric adjustment for 52”-84” screens, vesa: 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, 600x400, 800x400, 800x600 (15 pages)
Page 1
FSM02-B User manual FLOOR STAND WITH WEELS AND ELECTRIC ADJUSTMENT FOR 55’’-100’’ SCREENS VESA: 200x200, 300x200, 300x300, 350X350, 400x200, 400x300, 400x400, 600x200, 600X400, 800X400, 800X600 55’’-100’’...
Page 2
Content M-A (x4) M-B (x4) M-C (x4) D (x2) B (x1) C (x2) A (x1) M5x14 M6x14 M6x30 E (x1) F (x1) G (x1) H (x1) I (x1) J (x1) M-D (x4) M-E (x4) M8x30 M8x50 K (x1) L (X4) M (x8) N (x4) O (x8)
Page 3
Before installation • Read the instruction manual, if you are in any doubt about the instructions or warnings, contact your local dealer. • Make sure you have received all parts according to the components checklist for installation. If any parts are missing or defective, please contact your local distributor.
Page 14
Installation Note: If the caster wheel does not make contact with the ground, use the Allen key to turn the wheel nut counterclockwise until contact is made.
Page 15
Warning The product is electrically operated. In order to prevent burns, fire and electric shock, to ensure safe and correct use of the system, and to maintain the longevity of the overall construction and built-in electronics, please read the instructions carefully. •...
Page 16
Configuration and pairing of the controller with the stand STEP 1 : Each time the cradle is turned on, the unit will emit a series of consecutive beeps, indicating that the cradle is ready for setup. If this is the first time you turn on the cradle, you must first pair the remote control with the cradle, and then initiate the default setup.
Page 17
Remote Control User Guide 1. Up/down arrows: Press and hold the `` ´´ button to raise the bracket. Press and hold the `` ´´ button to lower the bracket. Note: Remove all surrounding objects before adjusting the height of the bracket. 2.
Page 18
Problem Solving Guide 1. It doesn’t work. There are 7 possibilities: • Incorrect operation. Check if the unit beeps after pressing a button. If yes, follow the instructions in the manual to operate the bracket correctly. • The mounting system may be defective. Check if the unit beeps three times after pressing a button. If so, reset the system. •...
Page 19
Warranty information Since 1 January 2022, TooQ offers a 3-year warranty from the time of purchase, so it will always keep the purchase ticket or invoice containing the date of purchase. The distributor or retailer from whom you purchased the product will attend to your claim and offer technical service while the warranty is in force.
Need help?
Do you have a question about the LUX FSM02-B and is the answer not in the manual?
Questions and answers