Power Tech Generators PTK-30-50SS Operator's Manual page 14

 Check the engine oil level to be appropriate level
 Check for tightness of battery cables/terminals.
 Check battery terminals for absence of corrosion
 Check coolant level for proper Fill (add if necessary)
 Check for absence of water in fuel (drain if necessary)
 Check for absence of DTC or failures
 Check for absence of excessive fan belt looseness
The LCD display is the primary source of information of the controller. The LCD
allows you to view/change settings and monitor the status of sensors and other
engine parameters.
* NOTE: The genset mounted controller must be in "AUTO" mode in order to enable the remote
panel functionality.
Operating the Generator
Daily Pre Operational Checks
Using the PTG Series Controller
PTK-30-50SS Operators Manual
Generating Power to the World
Page 14 of 27