Table of Contents
Advertisement
To check the the fuses of the main fus-
es group (2):
N
Turn the ignition switch (3) in the "
(OFF) position.
N
Remove the rider saddle, see p. 94 (RE-
MOVING THE RIDER SADDLE).
N
The fuse carrier (7) contains the main
fuses group (2).
30A MAIN FUSES CIRCUIT
F) From battery to: ignition.
G) From battery to: ignition.
NOTE
One fuse is a spare fuse.
CAUTION
Extract the fuses one by one, in such a
way as to avoid positioning them incor-
"
rectly during reassembly.
NOTE
If you remove one of the 30A fus-
es, this will set the digital clock and the red
line setting to zero. To reset these func-
tions, see p. 32 (MULTIFUNCTION COM-
PUTER).
N
Remove, one by one, the fuse and in-
spect the filament (8). If it is open, the
fuse must be replaced.
N
Replace the blown fuse with the appro-
priate spare fuse or with a new fuse hav-
ing the same amperage rating.
WARNING
If you replace the fuse and it blows
again immediately, there is a serious
problem with the electrical system of
your vehicle. Do not attempt to contin-
ue using your vehicle. Take it to your
Local
Dealer for repair and ser-
vice.
NOTE
If you use the spare fuse, replace
it as soon as convenient.
use and maintenance RSV mille
105
Advertisement
Table of Contents
