aidapt VG704BS Fixing And Maintenance Instructions page 2

INTRODUCTION
The Brookfield dual motor lift chair by Aidapt allows you to elevate your feet for total comfort and recline
the back ensuring a relaxed comfortable position for the user. Aidapt's dual motor range of lift chairs are
engineered and designed to be the ultimate in lift chair performance, style and comfort. Powered by the
world class OKIN 2 motor drive system for total reliability and efficiency.
Features of the chair include the spring assisted footrest that will flip up if it comes into contact with an
obstruction when lowering to minimise injury or damage. The Brookfield range is fitted with 4 castors
(2 braked and 2 unbraked) for easy manoeuvrability.
The Brookfield range of chairs have been designed to an excellent standard, the OKIN dual motor has
been engineered to offer you the complete infinity position, enabling you to raise the chair to an almost
standing position for easy transfer to and from the chair and to recline to your preferred sleeping/relax
position.
Please read the instruction manual thoroughly for the correct usage of the chair, especially the
safety information.
Ensure you keep this manual readily available for future reference after you have read it through.
FEATURES
· Removeable back for easy handling
· Removeable sides fro side transfer
· Easy to use hand control
· Choice of colours available
· Raises to an almost standing position
· Infinity position from totally flat to lift up position
· Lounger style design that fully supports the legs
· Maximum seat elevation to enable perfect stability in full lift position
· OKIN dual motor drive system
· Top grade steel base for durability and cross support strength
· Engineered bushings & washers at pivot points provide quiet smooth operation and reliability
· Tested, certified and approved by SGS to CE, RoHS, BS8474:2013, BS5852: part 2 Crib 5, EMC, LVD
· Battery back-up in case of power failure in the home ( Batteries not supplied)
· Maximum capacity of chair – 160kg
SAFETY INFORMATION
WARNING: The chair must be assembled correctly
according to the assembly instructions enclosed.
The manufacturers of the chair, their agents and distributors
are not liable for any damages caused by
improper assembly of the chair.
WARNING: Please ensure you take care when adjusting chair
positions to avoid trapping or pinching of body parts.
2
Fixing and Maintenance Instructions