ZyXEL Communications ZYWALL OTPV2 - SUPPORT NOTE V1 Support Notes page 18

Step4. Enable the Remote Access
1) To allow the user to log in via SSL VPN, you have to enable the Remote Access Permission for this user.
2) Right click the OTP user, and then click the "Properties". Go to the "Dial-in" tab and choose "Allow
access".
Step5. Change the sequence of entering OTP and PIN for authentication
By Safenet default setting the password entry sequence is OTP + PIN. You should change this sequence to
match ZyWALL USG's behavior (PIN+OTP). Here is the instruction for this.
1) Go to C:\Program files\Aladdin\SafeWord\Servers\Shared\ folder and open the file
(use Notepad for editing).
2) Search for the string: "
Pin_Before_Password=off
3) At the command "
4) Reload the SafeWord server.
# Set this to 'on' to force SoftPin to precede the password
", change the value to 'on'.
All contents copyright (c) 2010 ZyXEL Communications Corporation.
ZyXEL
– ZyWALL OTPv2 Support Notes
SCCservers.ini
"
18