ZyXEL Communications ZYWALL OTPV2 - SUPPORT NOTE V1 Support Notes page 27

ZyXEL
– ZyWALL OTPv2 Support Notes
Step4. Enable the Remote Access
1) To allow the user to log in via SSL VPN, you have to enable the Remote Access Permission for this user.
2) Right click the OTP user, and then click "Properties". Go to the "Dial-in" tab and choose "Allow access".
Step5. Change the sequence of entering OTP and PIN for authentication
By Safenet default setting the password entry sequence is OTP + PIN. You should change this sequence to
match ZyWALL USG's behavior (PIN+OTP). Here is the instruction for this.
SCCservers.ini
1) Go to C:\Program files\Aladdin\SafeWord\Servers\Shared\ folder and open the file
(use Notepad for editing).
# Set this to 'on' to force SoftPin to precede the password
2) Search for the string: " "
Pin_Before_Password=off
3) At the command " ", change the value to 'on'.
4) Reload the SafeWord server.
All contents copyright (c) 2010 ZyXEL Communications Corporation.
27