Table 232 System Maintenance Menu Diagnostic - ZyXEL Communications ZYWALL 2 WG User Manual

Chapter 41 System Information & Diagnosis

Table 232 System Maintenance Menu Diagnostic

FIELD
Ping Host
WAN DHCP Release
WAN DHCP Renewal
PPPoE/PPTP/3G
Setup Test
Reboot System
WAN
Host IP Address
Enter the number of the selection you would like to perform or press [ESC] to cancel.
584
DESCRIPTION
Enter 1 to ping any machine (with an IP address) on your LAN, DMZ, WLAN
or WAN. Enter its IP address in the Host IP Address field below.
Enter 2 to release your WAN DHCP settings.
Enter 3 to renew your WAN DHCP settings.
Enter 4 to test the Internet setup. You can also test the Internet setup in
Menu 4 - Internet Access. Please refer to
details.
This feature is only available for a 3G connection or dial-up connections
using PPPoE or PPTP encapsulation.
Enter 11 to reboot the ZyWALL.
If you entered 2, 3 or 4 in the Enter Menu Selection Number field, enter the
number of the WAN interface in this field.
If you entered 1in the Enter Menu Selection Number field, then enter the IP
address of the computer you want to ping in this field.
Chapter 31 on page 503 for more
ZyWALL 2WG User's Guide