JumpSport ALLEYOOP ProFlex-II Basketball Set User Manual page 9

Hoop
Ref. #7
8)
Attach net around hoop by working from one side.
10)
Important: Basketball Set should be installed on a pole directly opposite the entrance to the safety enclosure.
Remove existing ball end cap from pole. Install cap with notch over top of pole. With the top two M10 bolts straddling the enclosure pole
on the neck of the cap, install a pole clamp and two M10 Nylock nuts, as shown. Repeat for lower bolts, and tighten snugly when you are
happy with the positioning of the hoop and backboard. Hang enclosure net into notch on ball cap or securely over bolt assemblies.
Net
Ref. #8
9)
the backboard at one end of the trampoline. Mounting is similar
to mounting to an enclosure pole, shown below.
9
Assembly and Installation Instructions
Rectangular trampolines may use a backboard truss to mount