Supported Raid Controllers; Perc 5/E Adapter - Dell POWERVAULT MD1000 Support Matrix Manual

Dell™ PowerVault™ MD1000 Systems Support
Matrix
This document provides information on supported software and hardware for Dell PowerVault MD1000
Systems.
The PowerVault MD1000 supported software and hardware are directly tied to the RAID controller to which it is
attached. If a PERC 5/E or PERC 6/E is supported in a server, then the PowerVault MD1000 is supported on
that server.
NOTE: For the latest driver and firmware releases, see the Downloads section at support.dell.com.

Supported RAID Controllers

PERC 5/E Adapter

Table 1 PERC 5/E Minimum Revision Requirements for PowerVault MD1000 Systems (SAS/SATA)
Component
Firmware
Microsoft ® Windows ® 2003 Server and
Windows Server 2008
Microsoft Windows Server
Red Hat ® Enterprise Linux
version 3 (x86)
Red Hat Enterprise Linux
version 4 (x86 and x86-64)
Red Hat Enterprise Linux
version 5 (x86 and x86-64)
®
SUSE Linux Enterprise
Server 9 (x86-64)
SUSE Linux Enterprise Server 10 (x86-64)
NOTE: The MD1000 is not supported on SAS 5/E.
NOTE: The MD1000 is not supported as a boot device.
NOTE: Refer to Supported OS section below for additional support added after initial release.
Minimum
Revision
5.2.1-0066
2.14.0.32
®
2003 x64 2.14.0.64
® 00.00.03.16-1
00.00.03.16-1
00.00.03.16-1
00.00.03.16-1
00.00.03.16-1
Notes
Firmware
Driver
Driver
Driver
Driver
Driver
Driver
Driver
3