Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Kingspan Klargester BioTec+ Control Panel
Summary of Contents for Kingspan Klargester BioTec+ Control Panel
- Page 1 1014336 01 ECN 2102 BioTec+ Control Panel July 2024...
- Page 2 1014336 Issue 01 BioTec+ Control Panel User Manual Contents Health and Safety ............................3 Declaration of Conformity ..........................3 Technical Data ..............................3 General description ............................4 Valve Outputs ............................4 Digital Inputs ............................4 Pressure Sensor ............................. 5 General Operation ............................5 5.1 System Operation ............................
- Page 3 1014336 Issue 01 BioTec+ Control Panel User Manual Health and Safety These warnings are provided in the interest of safety. You must read them carefully before installing or using the equipment. It is important that this document is retained with the equipment for future reference. Should the equipment be transferred to a new owner, always ensure that all relevant documents are supplied in order that the new owner can become acquainted with the functioning of the equipment and the relevant warnings.
- Page 4 1014336 Issue 01 BioTec+ Control Panel User Manual General description The BioTec+ control Panel is used to control and monitor the Kingspan Klargester BioTec+ SBR (Sequencing Batch Reactor) Domestic Wastewater Treatment Units. The control panel is equipped with only two 230V relay...
- Page 5 1014336 Issue 01 BioTec+ Control Panel User Manual 4.3 Pressure Sensor The control panel is equipped with an analogue 0-500mBar pressure sensor which measures the pressure inside the valve chamber. Thus, it monitors the pressure at all valves. The pressure monitoring can be used for: •...
- Page 6 1014336 Issue 01 BioTec+ Control Panel User Manual 5.2 BioTec+ SBR Process...
- Page 7 1014336 Issue 01 BioTec+ Control Panel User Manual Installation 6.1 Wiring Diagram...
- Page 8 1014336 Issue 01 BioTec+ Control Panel User Manual 6.2 Beacon (Optional) Connection Low voltage / volt free contact Jumper voltage. Set relay voltage to jumper up: +5VDC Beacon. Relay closed without power supply. At mains failure (= without power supply) and Jumper NC: alarms the relay is closed ->.
- Page 9 1014336 Issue 01 BioTec+ Control Panel User Manual 6.4 Gravity Tank Wire the mains into the isolator in the blower housing. II. Turn the control panel on, it will prompt user to set the RTC (Real Time Clock), which is the current time. When the RTC is set and you want to change it, simply navigate from the status screen (the default screen with “BioTec+”...
- Page 10 1014336 Issue 01 BioTec+ Control Panel User Manual Manual Check of the Valves and Electric Outputs...
- Page 11 1014336 Issue 01 BioTec+ Control Panel User Manual 8. Alarms In the event of an alarm the red LED left of the LCD starts flashing, the buzzer beeps and an alarm message is displayed in the first row of the LCD Pressing the <OK>...
- Page 12 1014336 Issue 01 BioTec+ Control Panel User Manual...
Need help?
Do you have a question about the Klargester BioTec+ Control Panel and is the answer not in the manual?
Questions and answers