HOMCOM 820-439V70 Manual page 4

1. Invert the electrical oil heater with bottom up.
2. Fix the caster board on the electrical oil heater body with waterfall holders.
3. Install the casters on the baseboard.
4. After installation, turn the electrical oil heater over with casters on the ground
and rest it for 3 to 5 minutes before use.
VIII. Precautions
1. It is strictly forbidden to cover the venting holes, and the machine is strictly
protected from water ingress. Clothing should not be baked directly on the
electrical oil heater to prevent fire.
2. The heater should be filled with special oil. If the oil container needs to be
opened during repairs, the work can only be done by the manufacturer. If leakage
occurs, contact the after-sales service agent of the manufacturer.
3. The discarding of equipment should comply with the relevant regulations of oil
discharge.
4. The heater shall not be directly placed under the power socket for use, and
reliable grounding wires and special sockets must be installed.
5. When the heater is not under guard, or when you finish using it, go out or do not
use it for a long time, turn off the power switch first, and then unplug the power plug.
6. Clean and maintain after first pulling out the power plug and waiting for the body
to cool.
7. If the flexible wire of the power supply is damaged, in order to avoid danger, it
must be replaced by the professional of the manufacturer, its maintenance
department or similar department.
8. The electrical oil heater must be placed on a flat surface for use.
9. When the heater is working, it is strictly forbidden to touch its body to prevent
high temperature burns; please pay special attention to children.
10. It is forbidden to switch on and off the heater by plugging and unplugging power
cord plug instead of power switch.
11. Do not operate the heater switch or unplug the power cord plug with wet hands
to prevent electric shock.
12. There is no comprehensive protection for children or persons with disabilities in
the electrical oil heater; children should be supervised to ensure that they do not
play with the heater.
13. This product is only suitable for indoor use and is forbidden to be used outside.
14. Do not bend, pull or tangle the power cord to prevent it from overheating.
15. Please do not turn on the power supply before the machine is assembled to
avoid accidents.
16. This product is not suitable for people with physical, sensory or intellectual
deficiencies or those who lack experience and common sense.
17. Unplug the power plug before moving, and move the machine after cooling.
Care must be taken when moving. Do not pull the power cord directly to move the
machine.
18. This product should not be placed next to curtains and indoor furniture, but
should be placed more than 1 meter away from the wall and furniture and where
there is no cover within 1 meter of its top to facilitate air circulation.
19. Do not use or store it in a humid and dusty place for a long time to avoid
accidents such as corrosion of the outer casing or leakage and inductance due to
moisture.
20. Do not disassemble the machine at will, and do not modify the product in any
way to avoid danger.
21. Pull out the power cord from the power cord box before turning on the power. It
is normal for the product to have a slight sound and odor during heating.
22. Do not use water to rinse the machine and do not drop water into the heater
cover.
3