HOMCOM 820-439V70 Manual page 3

IV. Packing list
Name Electrical oil heater body Baseboard Caster
Qty 1 set 2 pcs. 4 pcs.
V. Product structure diagram
Adjustable thermostat
Electrical oil heater
Power switch
Baseboard
Reel
Caster
VI. Method of use
1. Open the packing box, take out the body and confirm whether the product is
intact.
2. Before use, please make sure that the rated voltage of the power socket is 220-
240V AC, the rated current is greater than 15A and there is a reliable and safe
grounding device.
3. The electrical oil heater can only be used after the casters are properly installed.
Refer to Caster Installation Method .
4. Method of using the type:
(1) Rotate the thermostat clockwise to the top
(2) Turn on the power switch to start heating. If you need to heat up quickly, adjust
the power switch to the highest power.
(3) When the room temperature meets your needs, you can adjust the thermostat
back until hear "click". At this time, the electrical oil heater will enter a constant
temperature state and the thermostat will operate as the temperature rises and
falls.
VII. Installation method
*Installation method of casters:
2