Vantage Report User's Guide
Table 49 Network Attack > Intrusion > Summary > Drill-Down
LABEL
% of Intrusions
Total
Back
6.2.3 Top Intrusion Signatures
Use this report to look at the top intrusion signatures by number of intrusions.
Note: To look at intrusion reports, each ZyXEL device must record intrusions in its
log. See the User's Guide for each ZyXEL device for more information. In most
devices, go to Logs > Log Settings, and make sure IDP is enabled. Then, go
to IDP > Signature, and make sure the ZyXEL device logs each Attack Type
you want to see in Vantage Report.
Click Network Attack > Intrusion > Top Intrusions to open this screen.
117
DESCRIPTION
This field displays what percentage of all intrusions in the selected time interval
was made by each intrusion signature.
This entry displays the totals for the intrusion signatures above. If the number of
signatures in the selected time interval is greater than the maximum number of
records displayed in this table, this total might be a little lower than the total in
the main report.
Click this to return to the main report.
Chapter 6 Network Attack