Table of Contents
Advertisement
If you choose No in Figure 9, you will then see the next screen asking you to select the
platform (Linux or Windows) on which the syslog server us running. Then click Next to
continue to the screen shown in Figure 10.
10. The syslog server must be either a syslog server running on Linux or a Kiwi syslog server
2
for Windows
(see the Kiwi website for details).
Vantage communicates with a Linux syslog server using SSH (Secure SHell), so you must
enable the SSH daemon on the Linux syslog server. This allows the Linux syslog server to
receive logs. For Vantage to receive logs from the Linux syslog server, you must do the
following on the Linux syslog server:
Find row:
Add this row after it:
2
At the time of writing, only these syslog servers are supported and they are not bundled with
Vantage CNM 2.0.
Vantage CNM 2.0
Figure 10 Configure the syslog Server Found
/etc/syslog.conf
14
Advertisement
Table of Contents
