Wan Dhcp; Figure 175 Menu 24.4 System Maintenance: Diagnostic; Figure 176 Lan & Wan Dhcp; Table 121 System Maintenance Menu Diagnostic - ZyXEL Communications PRESTIGE 2302RL User Manual

P-2302R Series User's Guide

Figure 175 Menu 24.4 System Maintenance: Diagnostic

32.4.1 WAN DHCP

DHCP functionality can be enabled on the LAN or WAN as shown in the following figure.
LAN DHCP has already been discussed. The Prestige can act either as a WAN DHCP client
(IP Address Assignment field in menu 4 or menu 11.3 is Dynamic and the Encapsulation
field in menu 4 or menu 11 is Ethernet) or None, (when you have a static IP). The WAN
Release and Renewal fields in menu 24.4 conveniently allow you to release and/or renew the
assigned WAN IP address, subnet mask and default gateway in a fashion similar to winipcfg.
Figure 176 LAN & WAN DHCP
The following table describes the diagnostic tests available in menu 24.4 for your Prestige and
associated connections.

Table 121 System Maintenance Menu Diagnostic

FIELD
Ping Host
WAN DHCP Release
304
Menu 24.4 - System Maintenance - Diagnostic
TCP/IP
1. Ping Host
2. WAN DHCP Release
3. WAN DHCP Renewal
4. Internet Setup Test
System
11. Reboot System
Enter Menu Selection Number:
Host IP Address= N/A
DESCRIPTION
Enter 1 to ping any machine (with an IP address) on your LAN or WAN.
Enter its IP address in the Host IP Address field below.
Enter 2 to release your WAN DHCP settings.
Chapter 32 System Information and Diagnosis