ZyXEL Communications PRESTIGE 2302RL Quick Start Manual page 7

P-2302R Series
3.4 SIP Account 1 Setup
Note: You should have a voice account already set up.
Fill in the fields with information from your voice service provider. Leave the default settings in fields for which
no information was provided (except if otherwise specified).
Note: This screen configures SIP account 1. See the User's Guide for details on using the VoIP
screens to configure SIP account 2.
If you have a SIP account like 1234@VoIP-
provider.com,"1234" would be the SIP
Number and "VoIP-provider.com" would be
the SIP Service Domain.
REGISTER Server Address/Port: If you
have no registrar server information, copy
what you entered in the SIP Server
Address/Port fields.
Voice Compression Type: Use the setting
you were given, otherwise leave the default
setting.
NAT Passthrough Type: Use NONE unless
you were told to use a STUN or outbound
proxy server.
Server Address/Port: Enter the STUN or
outbound proxy server's information.Ignore
these fields if you selected for the NAT
NONE
Passthrough Type.
Country Code: Select the country where
your Prestige is located.
Click Finish.
The PWR/VoIP LED turns orange after the
Prestige registers your SIP account.
7