Download Print this page

Ergotron Neo-Flex Mobile Media Center LD User Manual

With 90 portrait/landscape rotation
Hide thumbs Also See for Neo-Flex Mobile Media Center LD:

Advertisement

Quick Links

Holds displays with the following
VESA mounting hole pattern:
• 100 x 100 mm
• 200 x 200 mm
• 200 x 300 mm
• 300 x 200 mm
• 300 x 300 mm
• 400 x 200 mm
• 400 x 300 mm
• 500 x 200 mm
• 500 x 300 mm
• 600 x 200 mm
• 600 x 300 mm
• 200 x 400 mm
• 300 x 400 mm
• 400 x 400 mm
• 500 x 400 mm
• 600 x 400 mm
Holds displays with the following
VESA mounting hole pattern:
• 75 x 75 mm
• 100 x 100 mm
• 200 x 100 mm
• 200 x 200 mm
15mm
888-24-073-P-02 rev. K • 02/11
25 - 50 lbs
(11.3 - 22.7 kg)
25 - 36 lbs
(11.3 - 16 kg)
Stored Energy Hazard: The lift mechanism in the tower is under tension and will move up rapidly, on its
own, as soon as attached equipment is removed. For this reason, DO NOT remove equipment or make
adjustments to lift tension unless the front assembly has been moved to the highest position on the tower!
警告  
れるた瞬間に高速で上に移動します。  このため、 前面の部品がタワーの最高位置にきていない場合は、 器具を
取り外したり、 張力を調節して増加させないようにして ください。  この指示に従わない場合、 重篤な身体傷害お
警告
部装置移到支柱最顶端时,不要拆除设备或调节升降张力。不遵守本规定可能导致严重的人身伤害和/
<30 lbs
(15 kg)
경고
제거되자마자 바로 자체의 빠른 속도로 올라가게 됩니다. 이러한 이유로 전방 에셈블리가 타워의
가장 높은 지점으로 올라가기까지는 장비 제거나 리프트의 장력을 조정하지 마십시오! 이 안내를
<5 lbs
(2.2 kg)
13mm
14mm
Neo-Flex Mobile Media Center, LD
with 90˚ Portrait/Landscape rotation
20"
(510 mm)
20"
(510 mm)
Failure to follow this instruction may result in serious personal injury and/or equipment damage!
蓄積エネルギーの危険性: タワーのリフ ト機構には張力がかかっており、 付属していた器具が取り外さ
よび/または器具の破損の原因となるこ とがあります。
储能危害:支柱中的升降机构有张力并会在拆除所安装的设备后自行快速上升。因此,在将前
저장에너지 위험성: 타워의 리프트 기계장치는 장력을 받는 상태에 있으며, 장착 장비가
따르지 않으면, 심각한 부상 및/또는 장비의 손상을 초래할 수 있습니다!
-15˚
+5˚
-25˚
+5˚
WARNING
或设备损坏!
User's Guide
ユーザーガイド
用户指南
사용자 안내서
90˚
360˚
1 of 16

Advertisement

loading
Need help?

Need help?

Do you have a question about the Neo-Flex Mobile Media Center LD and is the answer not in the manual?

Questions and answers

Summary of Contents for Ergotron Neo-Flex Mobile Media Center LD

  • Page 1 Neo-Flex Mobile Media Center, LD with 90˚ Portrait/Landscape rotation User's Guide ユーザーガイド 用户指南 사용자 안내서 -15˚ 90˚ Holds displays with the following VESA mounting hole pattern: • 100 x 100 mm • 200 x 200 mm • 200 x 300 mm +5˚...
  • Page 2 Leg Mounting Hardware M10 x 60mm Leg Cover Mounting Screws M3.5 x 6mm Shelf Mounting Hardware M3 x 37mm TM Mounting Hardware M6x8mm M8 x 14mm M4 x 16mm 400mm Extension Hardware M5 x 16mm Large Display Cart Hardware 5.1(ID) x 10(OD) x 6mm M6x20mm 8.1(ID) x 16(OD) x 6mm M4x20mm...
  • Page 3 Shippinng Box 出荷用ボックス 装运箱 15mm Leg Mounting Hardware Leg Cover Mounting Screws M3.5 x 6mm 注意: 調節ネジは締めすぎないよ うにし て く ださい。 強く締め 付けすぎる と、 器具が破損する原因となります。 小心: 不要过度拧紧固定器。过度拧紧可能会损坏设备。 주의: 고정 장치를 너무 세게 조이지 마십시오. 너무 세게 조이면 장비가 손상될 수 있습니다. 888-24-073-P-02 rev. K • 02/11 3 of 16...
  • Page 4 Shelf Mounting Hardware M3 x 37mm Shelf Mounting Hardware M3 x 37mm 888-24-073-P-02 rev. K • 02/11 4 of 16...
  • Page 5 25 - 36 lbs 25 - 50 lbs (11.3 - 16 kg) (11.3 - 22.7 kg) Continue to Step 4 on page 8... 8 ページのステップ 4 へ続く... 继续至第 8 页中的第 4 步... 8 of 16 M5 x 8mm M6 x 8mm 888-24-073-P-02 rev. K • 02/11 5 of 16...
  • Page 6 25 - 36 lbs (11.3 - 16 kg) 75x75mm 200x100mm 200x200mm 100x100mm M4 x 6mm M4 x 6mm M4 x 12mm M4 x 6mm M6 x 14mm M6 x 14mm 888-24-073-P-02 rev. K • 02/11 6 of 16...
  • Page 7 It is important that you adjust this product according to the weight of the mounted equipment as described in the following steps. Any time equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum operation.
  • Page 8 25 - 50 lbs (11.3 - 22.7 kg) TM Mounting Hardware TM Mounting Hardware M8 x 14mm 13mm M6x8mm Continue to Step 6 on page 9... 100 mm 9 ページのステップ 6 へ続く... 100 mm 继续至第 9 页中的第 6 步... 9 of 16 200 mm 300 mm 400 mm 500 mm...
  • Page 9 FIND APPROPRIATE FASTENERS FOR YOUR DISPLAY: デ ィ スプレイ用に適切なファ スナーを見つける 25 - 50 lbs 为显示器找到合适的紧固件: (11.3 - 22.7 kg) Large Display Cart Hardware 5.1(ID) x 10(OD) x 6mm M4x20mm 8.1(ID) x 16(OD) x 6mm M6x20mm M4x40mm 5.1(ID) x 10(OD) x 18mm M6x45mm M5x20mm 8.1(ID) x 16(OD) x 24mm...
  • Page 10 100x100mm VESA Plate Hardware 25 - 50 lbs (11.3 - 22.7 kg) M5 x 10mm 100 mm 100 mm Use fastener chosen from Step 6. ステップ6で選択したファスナーを使用します。 使用第 6 步中选取的紧固件。 200 mm 300 mm 400 mm 500 mm 600 mm Use fastener chosen from Step 6. ステップ6で選択したファスナーを使用します。...
  • Page 11 25 - 50 lbs (11.3 - 22.7 kg) TM Mounting Hardware M4 x 16mm TM Mounting Hardware 90˚ 888-24-073-P-02 rev. K • 02/11 11 of 16...
  • Page 12 25 - 50 lbs (11.3 - 22.7 kg) It is important that you adjust this product according to the weight of the mounted equipment as described in the following steps. Any time equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum operation.
  • Page 13 Power Strip Hardware M5x9mm Cable Management Support Hardware Cable Management Support Hardware M5x8mm 888-24-073-P-02 rev. K • 02/11 13 of 16...
  • Page 14 Cable Management Support Hardware NOTE: Leave enough slack in cables to allow full range of motion. ケーブル配線はアームの移動が自由に行 えるよ う、 多少たるみを持たせて く ださい。 让电缆保持松驰 케이블을 느슨하게 유지 Top Cap Hardware M5x8mm 888-24-073-P-02 rev. K • 02/11 14 of 16...
  • Page 15 3.69” (93.7 mm) 3.2” (80 mm) 38.4"-58.4" (974 - 1484 mm) 38.4"-58.4" (974 - 1484 mm) 64" (1633 mm) 64" (1633 mm) 9.8" (249 mm) 9.8" (249 mm) 5" 16.8" (127 mm) 5" (427 mm) 9.8" (127 mm) (250 mm) 16.8"...
  • Page 16 DO NOT push Cart from front or back possible hazards. Only of Tower. DO NOT move Cart over cords or Ergotron-approved installers may uneven, dirty, soft or sloping surfaces. DO service or otherwise modify NOT move Cart by pushing on Display. Failure cart/stand.