Advertisement
Quick Links
A
1x
1
2
1x
4mm
3
4
4x
Add a separate keyboard and mouse to create a productive workstation.
B
1x
1x
1x
2x
M4 x 5mm
1x
10mm
Neo-Flex™ Combo Lift
6-16 lbs
(2.7-7.3 kg)
C
4x
M6 x 7mm
4x
1x
M6 x 10mm
1x
4x
M4 x 10mm
ASSEMBLY INSTRUCTIONS
6-12 lbs
(2.7-5.4 kg)
D
1x
4x
M4 x 10mm
4x
FRONT
1 of 10
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Ergotron Neo-Flex Combo Lift
Summary of Contents for Ergotron Neo-Flex Combo Lift
- Page 1 Neo-Flex™ Combo Lift ASSEMBLY INSTRUCTIONS 6-16 lbs (2.7-7.3 kg) 6-12 lbs (2.7-5.4 kg) Add a separate keyboard and mouse to create a productive workstation. M6 x 7mm M6 x 10mm FRONT M4 x 5mm M4 x 10mm M4 x 10mm 10mm 1 of 10...
- Page 2 Height Position top of screen slightly below eye level. Set Your Workstation to Work For YOU! Position keyboard at about elbow height with wrists fl at. Distance Position screen an arm's length from face—at least 20” (508mm). Position keyboard close enough to create a 90˚ angle in elbow. Angle Tilt screen to eliminate glare.
- Page 3 M6 x 10mm M6 x 7mm BACK FRONT FRONT BACK 3 of 10...
- Page 4 10mm 10mm 180˚ 180˚ M4 x 5mm M4 x 5mm M4 x 5mm M4 x 5mm 4 of 10...
- Page 5 75x75mm 100x100mm M4 x 10mm M4 x 10mm Temporarily place your laptop (or laptop and docking station) on the tray in order to align with monitor in the following adjustment steps. 5 of 10...
- Page 6 Vertical Adjustment Side-to-Side Adjustment Center total width of mounted equipment on stand. Forward and Back Adjustment To ensure stability, the docking station SHOULD NOT extend over the back of the tray. 6 of 10...
- Page 7 Attach Laptop to Tray Laptop with docking station Laptop Only To ensure stability, the docking station SHOULD NOT extend over the back of the tray. 7 of 10...
- Page 8 Cable Routing It is important that you adjust this product according to the weight of the mounted equipment as described in the following steps. Any time equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum operation. Adjustments should move smoothly and easily through the full range of motion and stay where you set it.
- Page 9 Lift – Up and down Follow these instructions to tighten or loosen tension. Tilt – Forward and Backward Follow these instructions to tighten or loosen tension. Check out the collection of computers & hardware we offer. 9 of 10...
Need help?
Do you have a question about the Neo-Flex Combo Lift and is the answer not in the manual?
Questions and answers