Table of Contents
Advertisement
3. CATV: Use a coaxial cable to connect the CATV port
to a television or set-top box with an F-connector.
Overly tightened coaxial cable may affect
transmission quality and/or break the connector
pin.
4. POWER: Use the included power adaptor to connect
this power socket to an appropriate power source.
Check the LEDs (Lights)
• The PWR LED turns steady on when you connect the
ONU-6040BF-2x to the power supply.
• The PON LNK LED turns on when the fiber connection
is available.
• The LAN LED turns on when the LAN port is properly
connected.
• The CATV LED turns on when the CATV port is
properly connected and the ONU-6040BF-2x detects a
video signal.
7
Hide quick links:
Advertisement
Table of Contents
