Hardware Connections - ZyXEL Communications ONU-6040BBF-22 - V1.00 User Manual

Introduction
The ONU-6040BF-2x is an optical network unit (ONU)
that allows you to enjoy high-speed Internet access
over optical networks. The ONU-6040BF-2x comes with
one fiber, four 10/100 Mbps RJ-45 ports and one co-
axial CATV connector. No configuration is required. On
the ONU-6040BF-2x, all device configuration is done
remotely by the OLT (Optical Line Terminal). Once you
have connected the hardware, you are ready to enjoy
Internet access.
Two ONU-6040BF-2x models are discussed in this
guide: ONU-6040BF-21 (with a 10km transceiver) and
ONU-6040BF-22 (with a 20km transceiver).

Hardware Connections

1. PON: Follow the steps below to connect an SC-type,
single-mode optical cable to the PON port for
Internet access.
Only qualified technicians should perform these actions!
Please skip this section if you are not a qualified
technician.
3