ZyXEL Communications NWA-3166 User Manual page 221

Note: Use the out-of-band management port or console port to configure the switch if
you misconfigure the management VLAN and lock yourself out from performing
in-band management.
On an Ethernet switch, create a VLAN that has the same management VLAN
ID as the NWA. The following figure has the NWA connected to port 2 and your
computer connected to port 1. The management VLAN ID is 10.
Figure 129 Management VLAN Configuration Example
Perform the following steps in the switch web configurator:
Click VLAN under Advanced Application.
1
Click Static VLAN.
2
Select the ACTIVE check box.
3
Type a Name for the VLAN ID.
4
Type a VLAN Group ID. This should be the same as the management VLAN ID on
5
the NWA.
Enable Transmitted Packets (Tx) Tagging on the port which you want to
6
connect to the NWA. Disable Tx Tagging on the port you are using to connect to
your computer.
NWA-3166 User's Guide
Chapter 20 VLAN
221