Devolo Magic 1 WiFi mini Manual page 77

The new devolo Magic adapter pairs auto-
matically so no button needs to be pressed.
The LED of this adapter now also flashes
white.
If the LEDs light up white on both
devolo Magic adapters, the new adapter
has been successfully integrated into your
existing devolo Magic network.
For each pairing operation, only one addi-
tional adapter can be added at a time.
3.4.3Changing the network password
A network password can also be changed in the
following ways:
b
Using the web interface of the devolo Magic
adapter (see Chapter 4.5 Powerline)
or
b
Using devolo Cockpit
devolo Home Networking App.
information, refer to the following chapter.
3.4.4 Establish a Wi-Fi connection with
the devolo Magic 1 WiFi mini
Establish the Wi-Fi connection with your laptop,
tablet or smartphone by entering the previously
noted Wi-Fi key as the network security key.
3.4.5 Integrating the
devolo Magic 1 WiFi mini into an
existing Wi-Fi network
To ensure that the devolo Magic 1 WiFi mini has
the same Wi-Fi configuration as your Wi-Fi router,
you can apply the Wi-Fi access data at the touch of
a button using the WiFi Clone function. This can
be enabled in different ways:
Activating WiFi Clone:
b
Activating WiFi Clone by pressing a button:
Briefly press the PLC button on your devolo
Magic WiFi adapter. After the button is pres-
sed, the LED flashes white. Press the WPS but-
or the
ton on your router within 2 minutes. Please
For more
consult your router's instruction for use to find
out how long to press the button for.
or
b
Activating WiFi Clone from the web interface.
More information about this function can be
Initial use 24
devolo Magic 1 WiFi mini