Devolo Magic 1 WiFi mini Manual page 76

23 Initial use
3.4.1Starter Kit – Automatic set-up for a
new devolo Magic Powerline net-
work
1
Connect the devolo Magic 1 LAN to your Inter-
net access device's network connection (e.g.
your Internet router).
CAUTION! Tripping hazard
Lay the cable in a barrier-free manner
and ensure that the electrical socket and
the connected network devices are easily
accessible
2
Plug both devolo Magic adapters into available
power sockets within 3 minutes. As soon as the
LEDs on both adapters flash white at regular
intervals of 0.5 sec., they are ready to operate
and automatically start the process of establis-
hing an encrypted connection to each other
(see Chapter 2.3.1 Reading the Powerline
indicator light).
If the LEDs on both devolo Magic adapters
light up in white, then your devolo Magic
network has been set up according to your
individual specifications and is protected
from unauthorised access.
devolo Magic 1 WiFi mini
3.4.2 Addition – Expanding an existing
Powerline network by adding
another devolo Magic 1 WiFi mini
Before you can use the devolo Magic 1 WiFi mini in
your devolo Magic network, first you have to
connect it to your existing devolo Magic adapters
as a network. This is accomplished by using a
shared password.
1
Plug the devolo Magic 1 WiFi mini into an
available power socket. As soon as the LED flas-
hes white at regular intervals of 0.5 seconds,
the adapter is ready to operate but not yet
integrated into a devolo Magic network (see
Chapter 2.3.1 Reading the Powerline indica-
tor light).
Pairing – Establishing a PLC connection
Before you can
devolo Magic 1 WiFi mini
devolo Magic network, first you have to
connect it to your existing devolo Magic ad-
apters as a network. This is accomplished by
using a shared password:
2
Within 3 minutes, press the Powerline button
on a devolo Magic adapter in your existing
devolo Magic network for approximately 1 sec.
use the new
in your