Features - ZyXEL Communications Dimension GS-1116 User Manual

Hide thumbs Also See for Dimension GS-1116:
Table of Contents

Advertisement

Dimension GS-1116/GS-1124 Gigabit Switch
Both ports 15 and 16 in the GS-1116 (or 23 and 24 in the GS-1124) support 3.3V Mini GBIC. The
GBIC port auto detects between Giga copper and Mini GBIC. The Mini GBIC module is optional.
When the Mini GBIC module is not installed, these act as Giga copper connections.
The switch is an ideal solution for solving traffic block at the core of the network. It offers auto-
negotiation 100/1000Base-T Gigabit Ethernet ports that can significantly improve your network
backbone performance.
1.2

Features

Conforms to IEEE 802.3 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3z Gigabit fiber and
IEEE802.3ab 1000Base-T standards.
IEEE 802.1p supports two priority queues for outgoing traffic helping improving network
efficiency and performance.
Auto-negotiating 100/1000Mbps Ethernet RJ-45 ports.
Automatic MDI/MDIX supported.
Switching fabric of 32Gbps in the GS-1116 and 48Gbps in the GS-1124.
N-way Auto-negotiation supported.
Embedded 4K MAC address table providing 4000 MAC addresses entries.
2 Megabits memory buffer.
3.3V Mini GBIC port for Gigabit fiber transceiver. .
Two Gigabit copper ports.
Supports auto address learning.
Supports store-and-forwarding switching architecture for abnormal packet filtering.
Back-Pressure-Base flow control on Half-duplex mode Ethernet ports.
Pause-Frame-Base flow control on Full-duplex mode Ethernet ports.
No-Blocking full wire speed architecture.
One fan for good ventilation and to increase system heat sink performance.
Power, 1000, LNK/ACT, FDX/COL LEDs and Mini-GBIC LEDs.
Standard 19-inch rack mount design
1.2.1 IEEE 802.1p Class of Service
The IEEE 802.1p Class of Service (CoS) provides two queues for high and low priority traffic. This
improves network efficiency and performance by giving higher priority to outgoing traffic. The lower
queue has a priority value in the range of zero to three and the higher queue has a priority value in the
range of four to seven.
1-2
Getting to Know the GS1116/GS-1124

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dimension gs-1124

Table of Contents