ZyXEL Communications ES-5005 Brochure page 2

Multiple standard DSL services
ADSL line card provides 48/72 ports with transmission bandwidth up to 25 Mbps/2.4 Mbps. ADSL line cards also provide G.bond port bonding to increase
service range or double transmission bandwidth. VDSL line cards provide with a ADLS2+ fallback function (Annex A and Annex B) allows Telco operators
migrating existing ADSL2+ services to VDSL2 services seamlessly. SHDSL line cards provide 48 ports with transmission bandwidth up to 5.69 Mbps/22.76
Mbps/45.52 Mbps in ATM/EFM mode. VDSL line cards provides 24/48 ports with transmission bandwidth up to 100 Mbps/100 Mbps. All DSL cards are hot
swappable to ensure system stability.
Advanced triple play functionality
The IES-5000/5005 provides complete ATM QoS (UBR/VBR/CBR) and Ethernet L2 QoS on the line cards. The IP QoS (Packet classification/Rate
Limiting/Queue Scheduling) is provided on the Network Termination cards as well. Sophisticated PVC to VLAN bridging and aggregation enables
end-to-end QoS and various service allocation and provisioning. In addition, the IES-5000/5005 supports non-blocking traffic forwarding and multicast
features with up to 256 multicast groups. For security, the IES-5000/5005 provides anti MAC/IP address spoofing, broadcast storm prevention, MAC count
limiting, and policy-based packet filtering. All these features allow ISPs/Telco operators to provide High Speed Internet access, VoIP, Near VOD, Broadcast
TV and TV on demand, and other features easily.
Robust physical safety design
The IES-5000/5005 guarantees physical safety by embedding voltage, temperature and FAN speed sensors. When an abnormal condition is detected, the
LED displays and/or the corresponding alarms will come up to alert the operators. In cases when the system temperature goes higher than the configured
threshold, thermal cutoff protection kicks into action and the system will shut down automatically.
Sophisticated OAM&P Element Management System (EMS)
The IES-5000/5005 provides various management methods: local console port, Web-based configuration, Telnet, and SNMP v1/v2/v3-based EMS (NetAtlas
Access EMS). Included management functions are Alarm and Status Surveillance, Configuration management, Performance management, and Fault
management. The IES-5000/5005 allows operators to create multiple administrative accounts and 3 levels of access rights. Accounts with the first-level
privilege have full access rights. Second-level privilege accounts have the same access rights as first-level accounts except for account management.
Third-level accounts can only view configuration settings and performance statistics. NetAtlas Access EMS also provides view-based MIB management
and XML-based north bound interface. These features allow Telco operators to provide wholesale service to smaller CLECs and ISPs.
Distributed and QoS-assured media gateway
The IES-5000/5005 provides a parallel and distributed media gateway architecture to empower VoIP services taking advantage of POTS voice signals, in
addition to FAX and modem services. With the architecture, each media gateway serves up to 48 POTS ports and operates independently with each other.
As part of the benefit, there is no throughput bottleneck or single-point failure issue in this architecture, the performance and reliability of the
VoIP/fax/modem services are outstanding as well. The media gateway provides G.711, G.723, G.726, G.729a/b and T.38 codecs while RFC3261 SIP and
H.248 network signaling protocols are supported as well.
IES-5000 IES-5000
IES-5005 IES-5005
6.5U/3.5U MSAN/DSLAM 6.5U/3.5U MSAN/DSLAM
with DC Power with DC Power