Figure 15-6 Smt: Add A Vlan Group - ZyXEL Communications Dimension ES-2008 User Manual

Ethernet switch

Table of Contents

Dimension ES-2008 Ethernet Switch

Table 15-3 SMT: VLAN Support Configuration: 802.1Q

FIELD

Port

This read-only field displays the port number or the trunk group on the

switch.

Note: This field is 0 to indicate that a port is in a trunk group.

VLAN ID

Enter the VLAN ID number that will be assigned to untagged traffic on a

given port. For example, if the default VLAN ID of port 10 is 100, all

untagged packets on port 10 will belong to VLAN 100.

The default setting for all ports is 1.

This feature is useful to accommodate devices that you want to participate in

the VLAN but that don't support tagging. Only one untagged VLAN is allowed

per port.

Ingress

Select Enable from the drop-down list box to forward frames belonging to a

Filtering

specific VLAN if the port belongs to that VLAN.

Select Disable to forward all frames, regardless of the port's VLAN setting.

Select All from the drop-down list box to accept all untagged frames.

Acceptable

Frame

Select Tag Only to drop all untagged frames.

Type

Press [ESC] to move the cursor back to the actions menu. Press [TAB] to select <Save>

and press [ENTER] to save the settings back to the switch.

Step 2.

After saving the settings, press any key to display the screen shown next.

actions->

Tab=Next Item

15-6

Dimension Switch ES-2008 : Create A VLAN Group

========================

VLAN Name: [

Port

Member

------------------------

Trk1.

Trk2.

<Quit>

<Edit>

Select the Action menu.

BackSpace=Previous Item