15.1 Port and Trunk Group Settings
Refer to the Port Trunking chapter for background information on trunking.
Follow the steps below to configure port parameters and set up trunk groups.
Step 1.
In the Switch Configuration screen, select Port/Trunk Configuration and
press [ENTER] to display the screen as shown next.
Step 2.
Select <Edit> in the actions menu and press [ENTER] to move the cursor to
the configuration fields.
Dimension Switch ES-2008 : Port/Trunk Configuration
========================
Port
Type
---------------------------------------------------------------------------
1.
10/100TX
2.
10/100TX
3.
10/100TX
4.
10/100TX
5.
10/100TX
6.
10/100TX
7.
10/100TX
8.
10/100TX
9.
100FX
actions->
<Quit>
Tab=Next Item
BackSpace=Previous Item
Follow the instructions in the next table to set the fields in this screen.
FIELD
Port
Switch Configuration
Switch Configuration
This chapter introduces various switch configurations.
Enabled
Auto
Negotiate
Yes
Enabled
Yes
Enabled
Yes
Enabled
Yes
Enabled
Yes
Enabled
Yes
Enabled
Yes
Enabled
Yes
Enabled
Yes
Disabled
<Edit>
Select the Action menu.
Figure 15-1 SMT: Port/Trunk Configuration
Table 15-1 SMT: Port/Trunk Configuration
This read-only field displays the port number (from 1 to 9 including the
fiber/gigabit port) on the switch.
Dimension ES-2008 Ethernet Switch
Speed/Duplex
Config
100 Full
100 Full
100 Full
100 Full
100 Full
100 Full
100 Full
100 Full
100 Full
<Save>
Quit=Previous menu
DESCRIPTION
Chapter 15
Flow
Group
Control
On
None
On
None
On
None
On
Trunk1
On
Trunk2
On
Trunk2
On
Trunk1
On
Trunk1
On
N/A
Enter=Select Item
15-1