Table 11-1 Port Mirroring - ZyXEL Communications Dimension ES-2008 User Manual

Dimension ES-2008 Ethernet Switch
FIELD
Port Mirroring Select ENABLE from the drop-down list box to activate port mirroring
State feature.
Select DISABLE to deactivate port mirroring. This is the default setting.
Analysis Port You must select a port from the drop-down list box to act as the sniffer
port when you select ENABLE in the Port Mirroring State field.
This field is NONE if the Port Mirroring State field is DISABLE.
Monitor Ports This read-only field displays the port number of the switch.
Monitor Rx Select this check box to monitor incoming traffic of the port.
Monitor Tx Select this check box to monitor outgoing traffic of the port.
11-2

Table 11-1 Port Mirroring

DESCRIPTION
Port Mirroring