Page 2
INTRODUCTION Read carefully this instruction manual before using the device We would like to thank you for using this product. This kit contains an LCD monitor and an outdoor camera. Their installation and maintenance are simple. 1. inside unit 1.Antenna 9.Intercom LED 2.Screen 10.Unlock button...
Page 3
3. LED indicator Intercom LED: under the intercom status, the LED will light Monitor LED: under the monitor status, the LED will display red and yellow lights Charging the LED display red light, charged the LED display green lights INSTALLATION 1.
Page 4
Installation Exten sion cable DC Power (excluded) 2 wire Lock Outdoor-camera (excluded) Power When mounting the outdoor-camera, ensure that it is located in dry place. It is important that the camera or the electronics do not get wet. The outdoor-camera should ideally be mounted at a height of between 1.45-1.50 meters.
Page 5
Notice : When the outdoor unit is mounted on the thicker wall where effects the signal, please extend the build-in Antenna or with included Extend antenna. Recharging the batteries If you use the outdoor camera on battery, you will need to recharge the battery via the internal unit.
Page 6
2. press the button to exit 3. Setting the bell tone: Under the monitor status, press the button to select bell tone. 4. Adjust the ring volume: Under the intercom status, press the button to adjust volume. 5. Adjust the brightness: Under the intercom status, press the button to adjust brightness.
Page 7
RX Sensitivity -85dBm Por la presente, Chacon, declara que el tipo de equipo radioeléctrico WLVDP-B01 es conforme con le Directiva 2014/53/UE.El texto completo de la declaración UE de conformidad esta disponible en la dirección internet siguiente : www.chacon.be-soporte-descarga Operating Temperature -10°C~ +50°C...
Need help?
Do you have a question about the WLVDP-B01 and is the answer not in the manual?
Questions and answers