Nice elero RolMotion M Operating And Assembly Instruction Manual

RolMotion M Roller Blind Drive
Contents
Operating and assembly
1
instructions
2 General information on these instructions
2.1 Standards and guidelines
2.2 Intended use
2.3 Foreseeable misuse
2.4 Warranty and liability
2.5 Customer service provided by the manufacturer 2
3 Safety
3.1 General safety instructions
3.2 Layout of safety instructions
4 Product description
4.1 Product contents
4.2 Accessories
5 Assembly
5.1 Mechanical fastening
5.2 Electrical connection
5.3 Connection example for RolMotion M
230 V / 50 Hz
5.4 Parallel circuit
5.5 Commissioning
5.5.1 Connection for assembly cable
5.6 Setting the end positions
5.6.1 Changing/deleting the end positions
5.6.2 Four variants of end position settings
5.6.3 Variant A: Upper and lower end position
freely adjustable
5.6.4 Variant B: Fixed upper limit stop, lower end
position freely adjustable
5.6.5 Variant C: Fixed upper and lower limit stop
5.6.6 Variant D: Upper end position freely adjustable,
fixed lower limit stop
5.7 Placement of roller blind slats
6 Travel profiles
6.1 Travel profile default mode
6.2 Travel profile whisper mode
6.3 Changing the travel profile
7 Troubleshooting
8 Servicing
1
9 Service/manufacturer's address
1
10 Repairs
1
11 Disassembly and disposal
2
12 Comments on EU Declaration of Conformity 8
2
13 Technical data and dimensions
2
13.1 RolMotion M
2
RolMotion M Roller Blind Drive
2
1 Operating and assembly instructions
2
Follow these instructions for safe and proper use. Observe
all assembly instructions. Incorrect assembly can lead
3
to serious injuries. Please keep this operating manual
for future reference to ensure that it can be accessed
3
throughout the entire service life of the product!
3 The German operating manual is the original version.
All documents in other languages are translations of the
3
original version.
4
All rights reserved in the case of patent, utility model or
design registrations.
4
2 General information on these
instructions
5
The content structure is based on the life cycles of the electric
motor drive (hereinafter referred to as "the product").
5
The manufacturer reserves the right to make changes
to the technical data in these operating instructions. In
5
some cases, this technical data may differ from those of
5 the respective product version; however, the functional
information will not undergo significant changes or become
5
invalid. The current version of the technical specifications
may be requested from the manufacturer at any time.
5
No claims may be asserted against the manufacturer
as a result of this provision. Deviations from textual or
5
visual statements may occur depending on the product's
technical development, features and accessories. Deviating
information for special versions will be provided by the
6
manufacturer in the sales documentation. Other information
shall remain unaffected by these provisions.
2.1 Standards and guidelines
6
During construction, the fundamental health and safety
6
requirements were applied and provision was made for the
appropriate legislation, standards, directives and guidelines.
The safety of the product is confirmed by the declaration
6
of conformity (see EC Declaration of Conformity). All
information relating to safety in these operating instructions
7
refers to the laws and regulations that are currently valid
in Germany. All information in these operating instructions
7
must be complied with at all times and without limitation. In
addition to the safety notes in these operating instructions,
7
the regulations on accident prevention, environmental
protection and occupational health and safety applicable at
7
the location of use must be observed and adhered to. The
regulations and standards for safety assessment can be
7
found in the EC Declaration of Conformity.
7
8
8
8
8
8
9
13 825.1001_EN_0822