Nice elero RolMotion/D+ M-868 Operating And Assembly Instruction Manual

RolMotion/D+ M-868 Roller Shutter Drive
Contents
Operating and assembly
1
instructions
2 General information on these instructions
2.1 Standards and guidelines
2.2 Intended use
2.3 Foreseeable misuse
2.4 Warranty and liability
2.5 Customer service provided by the manufacturer 2
3 Safety
3.1 General safety instructions
3.2 Layout of safety instructions
4 Product description
4.1 Product contents
4.2 Accessories
5 Assembly
5.1 Mechanical fastening
5.2 Electrical connection
5.3 Connection example for RolMotion/
D+ M-868 230 V/50 Hz
5.4 Commissioning
5.4.1 Connection for assembly cable
5.4.2 Radio connection (transmitter operation)
5.4.3 Operation in non-radio mode
5.4.4 Automatic configuration of end positions Important
5.4.5 Changing/deleting the end positions
6 Programming the transmitter
6.1 Programming the first transmitter
6.2 Programming additional transmitters
6.3 Deleting the radio connection between
transmitters and receivers
6.4 Programming or deleting further blind positions 6
7 Travel profiles
8 Troubleshooting
9 Servicing
10 Service/manufacturer's address
11 Repairs
12 Disassembly and disposal
13 Comments on EU Declaration of Conformity 8
1
14 Technical data and dimensions
1
14.1 RolMotion/D+ M-868
1
2
2
2
RolMotion/D+ M-868 Roller Shutter Drive
2
1 Operating and assembly instructions
2
Follow these instructions for safe and proper use. Observe
all assembly instructions. Incorrect assembly can lead to
2
serious injuries. Please keep this operating manual for fu-
ture reference to ensure that it can be accessed throughout
3
the entire service life of the product!
3
The German operating manual is the original version.
3 All documents in other languages are translations of the
original version.
3
All rights reserved in the case of patent, utility model or
design registrations.
4
2 General information on these
4
instructions
5
The content structure is based on the life cycles of the elec-
tric motor drive (hereinafter referred to as "the product").
5
The manufacturer reserves the right to make changes to
the technical data in these operating instructions. In some
5
cases, this technical data may differ from those of the
5 respective product version; however, the functional informa-
tion will not undergo significant changes or become invalid.
5
The current version of the technical specifications may be
requested from the manufacturer at any time. No claims
5
may be asserted against the manufacturer as a result of this
provision. Deviations from textual or visual statements may
5
occur depending on the product's technical development,
features and accessories. Deviating information for special
6
versions will be provided by the manufacturer in the sales
documentation. Other information shall remain unaffected
6
by these provisions.
2.1 Standards and guidelines
6
During construction, the fundamental health and safety
requirements were applied and provision was made for the
6
appropriate legislation, standards, directives and guidelines.
The safety of the product is confirmed by the declaration
of conformity (see EC Declaration of Conformity). All in-
formation relating to safety in these operating instructions
7
refers to the laws and regulations that are currently valid
in Germany. All information in these operating instructions
7
must be complied with at all times and without limitation. In
addition to the safety notes in these operating instructions,
7
the regulations on accident prevention, environmental
protection and occupational health and safety applicable at
7
the location of use must be observed and adhered to. The
regulations and standards for safety assessment can be
7
found in the EC Declaration of Conformity.
7
8
9
138251301_EN_0120