Nice elero RolMotion M-868 Manual

RolMotion M-868 Roller Blind Drive
Contents
Operating and assembly
1
instructions
2 General information on these instructions
2.1 Standards and guidelines
2.2 Intended use
2.3 Foreseeable misuse
2.4 Warranty and liability
2.5 Customer service provided by the manufacturer 2
3 Safety
3.1 General safety instructions
3.2 Layout of safety instructions
4 Product description
4.1 Product contents
4.2 Accessories
5 Assembly
5.1 Mechanical fastening
5.2 Electrical connection
5.3 Connection example for RolMotion M-868
230 V / 50 Hz
5.4 Commissioning
5.4.1 Connection for assembly cable
5.4.2 Radio connection (transmitter operation)
5.4.3 Operation in non-radio mode
5.5 Setting the end positions
5.5.1 Changing/deleting the end positions
5.5.2 Four variants of end position settings
5.5.3 Variant A: Upper and lower end position freely
adjustable
5.5.4 Variant B: Fixed upper limit stop, lower end
position freely adjustable
5.5.5 Variant C: Fixed upper and lower limit stop
5.5.6 Variant D: Upper end position freely adjustable,
fixed lower limit stop
5.6 Placement of the roller blind slats
5.7 Program the transmitter
5.7.1 Programming the first transmitter
5.7.2 Programming additional transmitters
1
5.8 Deleting the radio connection between
transmitters and receivers
1
5.9 Programming or deleting further blind positions 8
2
6 Travel profiles
2
7 Troubleshooting
2
8 Servicing
2
9 Service/manufacturer's address
10 Repairs
2
11 Disassembly and disposal
2
12 Comments on EU Declaration of Conformity 10
2
13 Technical data and dimensions
3
13.1 RolMotion M-868
3
3
3
4
4
RolMotion M-868 Roller Blind Drive
1 Operating and assembly instructions
5
5
Follow these instructions for safe and proper use. Observe
all assembly instructions. Incorrect assembly can lead
5
to serious injuries. Please keep this operating manual
for future reference to ensure that it can be accessed
5
throughout the entire service life of the product!
5 The German operating manual is the original version.
All documents in other languages are translations of the
5
original version.
6
All rights reserved in the case of patent, utility model or
design registrations.
6
2 General information on these instructions
6
The content structure is based on the life cycles of the electric
motor drive (hereinafter referred to as „the product").
The manufacturer reserves the right to make changes
6
to the technical data in these operating instructions. In
some cases, this technical data may differ from those of
7
the respective product version; however, the functional
information will not undergo significant changes or become
invalid. The current version of the technical specifications
7
may be requested from the manufacturer at any time.
No claims may be asserted against the manufacturer
7
as a result of this provision. Deviations from textual or
visual statements may occur depending on the product's
7
technical development, features and accessories. Deviating
information for special versions will be provided by the
manufacturer in the sales documentation. Other information
shall remain unaffected by these provisions.
7
7
8
8
8
9
9
9
9
10
10
138251101_EN_1219