Nice elero RolTop-868 Manual

RolTop-868 Roller Shutter Drive

Table Of Contents

1 Operating and installation instructions
2 General for instructions
2.1 Standards and Directives
2.2 Intended use
2.3 Foreseeable misuse
2.4 Warranty and liability
2.5 Customer service of the manufacturer
3 Safety
3.1 General safety instructions
3.2 Layout of the safety guidelines
4 Product description
5 Assembly
5.1 Mechanical fastening
5.2 Electrical connection
5.3 Connection example, RolTop-868 230 V/50 Hz 4
5.4 Commissioning
5.4.1 Connection for cable assembly
5.4.2 Connection for radio (transmission operation)
5.5 Setting the end positions and the relief
5.5.1 Relief function for the end position(s)
5.5.2 Relief function at the upper stop
5.5.3 Relief function at the lower stop
5.5.4 Changing / Deleting the limit positions
and deleting the discharge function
5.5.5 Programme or delete further curtain
positions
5.5.6 Four variants of end position settings
5.5.7 Variant A: Upper and lower end position
freely adjustable
5.5.8 Variant B: Fixed upper limit stop / lower end
position freely adjustable
5.5.9 Variant C: Fixed upper and lower limit stop
5.5.10 Variant D: Upper end position freely
adjustable, fixed lower limit stop
5.6 Programming the transmitter
5.7 Programming (additional) transmitter
5.8 Technical data
6 Troubleshooting
1 7 Repair
1 8 Repair
2 9 Manufacturer's address
10 Disassembly and disposal
2
2 11 Notes on the EC declaration of conformity
2 12 Technical data and dimensions
2 12.1 RevoLine S-868
2 12.2 RevoLine M-868
2 12.3 RevoLine M-868
2 12.4 RevoLine s_onro M-868
3 12.5 RevoLine L-868
3
4
4
5
5
5
5
RolTop-868 Roller Shutter Drive
5
1

Operating and installation instructions

5
Please keep these operating instructions for later use, to be
5 available throughout the life of the product!
The German manual is the original version.
5 All other documents represent the language translations of
the original text.
All rights in the case of a patent, utility model or ornamental
6
design registration are reserved.
6
2

General for instructions

The content structure is based on the life cycles of the elec-
6
tric motor drive (hereinafter referred to as "Product").
The manufacturer reserves the right to make changes to
6 the Specifications stated in these Operating Instructions
at any time. These may, in individual cases, be different
6
from the respective product version, however the functional
information will not undergo significant changes or become
invalid. The current version of the Specifications may be
7
requested from the manufacturer at any time. No claims
may be asserted against the manufacturer as a result of the
7
preceding sentence. Deviations from text or picture state-
ments are possible and depend on the technical develop-
7
ment, features, and accessories of the products. Deviating
information on special versions will be explained by the
7
manufacturer in the sales documentation. Other information
shall remain unaffected by these provisions.
7
8
8
8
8
8
8
9
10
11
11
12
138134006_EN_1023