TRP EVO PRO Installation Instructions

INSTALLATION INSTRUCTIONS
INTRUDUCTION
TRP manufactures performance-oriented components
Welcome to TRP -
for discerning individuals. Our brakes, levers, calipers, components
and accessories are designed to offer premium performance across
a variety of applications. Each product is conscientiously designed
and thoroughly tested to ensure the best performance and quality
possible.
Break In Period and Preferred Fluids -
break-in period to achieve optimal pad seating and performance.
Exercise caution for the first 30-40 cycles each time you replace the
brake pads. Your TRP disc brake is engineered to use TRP/Tektro
branded Mineral Oil, which is environmentally friendly and offers
increased performance by limiting the absorption of water. Use of
other manufacturers' oils will void the warranty and may negatively
impact the performance of the brakes leading to injury or death.
SAFETY WARNINGS & INFORMATION
SAFETY PRECAUTIONS AND CONSIDERATIONS
This braking system was designed for use on a single rider bicycle. Use of this system on any other vehicle or appa-
WARNING -
ratus will void the warranty and possibly cause you great personal harm and injury.
Disc brake systems, including the calipers and rotors get VERY HOT during regular use. DO NOT TOUCH or attempt
WARNING -
to service the rotor, caliper or brake assembly until you've allowed for sufficient cooling to occur.
These hydraulic brakes offer a significant increase in performance over traditional cable actuated systems. Follow
WARNING -
the break-in recommendations listed in this manual allowing yourself time to learn and become accustomed to the braking
characteristics.
Leaking oil indicates a potential BRAKE FAILURE. If your system is leaking oil, stop immediately and determine the
WARNING -
nature of the problem. DO NOT continue to ride a leaking system.
If your bike is involved in a fall or crash, stop and fully check the brake function including: lever, caliper, and rotor
WARNING -
are securely attached to the bike, pads are correctly installed and functioning, oil line is free from kinks, nicks, and leaks, and
master cylinder is intact and functioning correctly.
Always have a qualified mechanic check the brakes if you have any doubts.
Pad thickness must be at least 2.2 mm per side. Confirm this before each ride. Keep pads clean and free of oil or
WARNING -
hydraulic fluid. If pads become contaminated, discard and replace.
Read this manual completely before attempting to install or work on your TRP Brakes. If you are unfamiliar with any
CAUTION -
element of assembly or maintenance of this braking system, please consult a qualified mechanic for assistance.
Only use TRP or TEKTRO branded replacement Mineral oil when servicing the brakes. Other disc brake fluids, espe-
CAUTION -
cially DOT based oils, will harm the system and compromise braking performance.
Store Mineral oil at normal room temperature in a dark place. Keep out of direct sunlight.
CAUTION -
EMERGENCY INFORMATION
As with any oil, precautions in handling and clean up of any spills should be handled according to accepted best
CAUTION -
practices as governed by your state or country.
Clean up any spills promptly and completely.
If Mineral oil gets in your eyes IMMEDIATELY FLUSH WITH WATER for several minutes and get medical attention.
CAUTION -
If Mineral oil comes in contact with your skin, IMMEDIATELY RINSE with soap and water.
CAUTION -
Do not inhale Mineral Oil, it is harmful. If inhaled, move to a well ventilated environment and get medical attention.
CAUTION -
If you ingest Mineral Oil, it may cause vomiting and/or diarrhea.
CAUTION -
Please keep out of reach of children.
CAUTION -
Hydraulic brakes have a 30-40 cycle
w w w t . p r c y c n i l g c . o m
Edition：2024.10.09