Troubleshooting; Warranty - LENCO MES-221 Operating Manual

TROUBLESHOOTING

If your DVD player does not seem to be functioning properly, check the items below before you contact an authorized service center
Symptom
Power does not turn on or suddenly
turns off.
No picture or sound
No picture
No sound
No picture and sound
Distorted video or sound

Warranty:

If you have questions regarding the warranty, the length of warranty and the working method of it, you can find the information on our
site www.lenco.eu or you can directly contact the place where you purchased your product.
If at any time in the future you should need to dispose of this product please note that: Waste electrical products should
not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer
for recycling advice.
(Waste Electrical and Electronic Equipment Directive)
Check
Make sure the AC adapter is securely plugged into an AC outlet.
Turn the power off and then back on.
Check that the A/V cables are securely connected.
Check that the disc is a DVD (region number 1 or all), DVD-RW or AUDIO CD.
Do not use a disc that has scratches or dirt.
Check that the label-side of the disc is facing up.
The pick-up lens of the DVD player may be dirty. Contact the service center for lens
cleaning.
Check that the TV channel is set to VIDEO or AV if viewing with a TV.
Check that the LCD display is turned on.
Check that the display panel is open. If it is closed, audio will not be output to the
speakers.
Check the volume setting. If set to zero, turn up volume level.
Check that the headphones are plugged into the PHONES socket.
Speakers cannot be used with the headphones.
Check that the battery is properly installed and AC Adapter is properly connected.
Use a disc without scratches or dents.
For information and support, www.lenco.eu
7