LENCO MES-210 Instruction Manual page 28

Preferences
System Setup
1.TV DISPLAY
This item is used to set TV display mode.
Press the button to enter the setup of this item.
It includes 4:3 PS, 4:3 LB and 16:9. Press the
or button to choose the proper one. Press the
ENTER/ENT button to confirm your selection.
Press the button to exit from this item.
Note: Select 4:3 PS or 4:3 LB when a 4:3 TV is
connected.
Select 16:9 when a 16:9 wide screen TV is
connected.
2. ANGLE MARK
If the scene was shot from multiple angles, you
can change the camera angle of the scene you
are watching. Not all DVD discs have this
feature.
Press the or button to highlight this item.
Press the button to enter the setup of this item.
On: Select on, an angle icon will appear on the
screen. You will be notified if alternative viewing
angles are available.
Off: There will no angle icon appear on the
screen.
Press the or
Press the ENTER/ENT button to confirm your
selection. Press the
item.
28
button to select on or off.
button to exit from this